This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我想用ccs6加载ccs3下的out文件，但是不能设置，load program也是灰色
没有工程是吧，试一下下面的步骤：
1、打开CCS6;2、View -> Target Configurations -> User Defined，配置Connection中的仿真器，之后可以点击Target configuration；3、点击debug；4、Run -> Connect Target；5、Run -> Load -> Load Program，在弹出的对话框中选择要烧写的.out文件
当然，更推荐使用独立的烧写工具uniflash
