AM5718: pvrsrvkm: disagrees about version of symbol module_layout

您好，

已经收到了您的案例，调查需要些时间，感谢您的耐心等待。

您好！

可以尽快给出解决方案吗？感谢！

你能帮我更好地理解你的设置吗？你是按原样使用标准SDK 8.02的吗？或者修改后的版本，现在需要添加GPU模块？
您还可以共享完整日志吗？

用的是没编译安装gpu模块的SDK8.02，现在要添加GPU模块

Linux引导日志会有所帮助。所以您有一个修改过的Linux内核？您们不使用发布时的标准内核吗？或者您们试图使用不同版本的GPU软件并将其插入8.02内核？GPU的驱动程序包含在标准版本中。

现在我使用的linux内核确实是修改过的，但是修改的不多，只是缺少extra外部驱动驱动程序，现在想要在修改过的linux内核上安装gpu驱动，我已经尝试了用标准版本（都是SDk8.02）的gpu驱动程序安装到修改的Linux内核中，但是出现了我发布的问题。也可能是我安装操作有问题，您能给出一个只是单独安装gpu驱动的例子吗？特别感谢！

能否尽快给出相关问题的回答，感谢！

我们目前没有找到您需要的例子。

您能把Linux boot logs先分享给我们吗

好的，现在我将分享给您linux boot logs，
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.100-g7a7a3af903 (bbb@bbb-virtual-machine) (arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #34 SMP PREEMPT Thu Mar 28 06:52:33 UTC 2024
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TI AM5718 IDK
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
[    0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB
[    0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 24 MiB at 0x00000000fe400000
[    0.000000] OMAP4: Map 0x00000000afd00000 to (ptrval) for dram barrier
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x000000009fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x00000000a0000000-0x00000000ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000009fffffff]
[    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000afcfffff]
[    0.000000]   node   0: [mem 0x00000000b0000000-0x00000000ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000] On node 0 totalpages: 523520
[    0.000000]   DMA zone: 1152 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 131072 pages, LIFO batch:31
[    0.000000]   HighMem zone: 392448 pages, LIFO batch:63
[    0.000000] DRA722 ES2.0
[    0.000000] percpu: Embedded 16 pages/cpu s33740 r8192 d23604 u65536
[    0.000000] pcpu-alloc: s33740 r8192 d23604 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522368
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=ext4 root=/dev/mmcblk1p2 rw rootwait soc=am5718 board=TK-AQ-REC-XJT rfsuse=buildroot bootdev=emmc
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000090600000-0x0000000094600000] (64MB)
[    0.000000] Memory: 1549008K/2094080K available (10240K kernel code, 767K rwdata, 3144K rodata, 2048K init, 2914K bss, 364848K reserved, 180224K cma-reserved, 1286144K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000]     Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x330/0x4e4 with crng_init=0
[    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.001434] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000
[    0.002014] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@32000
[    0.002990] Failed to initialize '/ocp/interconnect@48800000/segment@0/target-module@2a000/timer@0': -22
[    0.003906] Console: colour dummy device 80x30
[    0.003967] Calibrating delay loop... 2062.33 BogoMIPS (lpj=1031168)
[    0.011138] pid_max: default: 32768 minimum: 301
[    0.011596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.011627] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.013824] CPU: Testing write buffer coherency: ok
[    0.013916] CPU0: Spectre v2: using ICIALLU workaround
[    0.014160] /cpus/cpu@0 missing clock-frequency property
[    0.014190] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.015106] Setting up static identity map for 0x80200000 - 0x80200060
[    0.015228] rcu: Hierarchical SRCU implementation.
[    0.015502] EFI services will not be available.
[    0.015655] smp: Bringing up secondary CPUs ...
[    0.015655] smp: Brought up 1 node, 1 CPU
[    0.015686] SMP: Total of 1 processors activated (2062.33 BogoMIPS).
[    0.015686] CPU: All CPU(s) started in HYP mode.
[    0.015686] CPU: Virtualization extensions available.
[    0.016632] devtmpfs: initialized
[    0.221740] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.222473] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.222503] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.226013] pinctrl core: initialized pinctrl subsystem
[    0.228271] DMI not present or invalid.
[    0.229217] NET: Registered protocol family 16
[    0.230743] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.233428] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.255676] thermal_sys: Registered thermal governor 'fair_share'
[    0.255676] thermal_sys: Registered thermal governor 'bang_bang'
[    0.255676] thermal_sys: Registered thermal governor 'step_wise'
[    0.255706] thermal_sys: Registered thermal governor 'user_space'
[    0.258819] cpuidle: using governor ladder
[    0.258850] cpuidle: using governor menu
[    0.267395] random: fast init done
[    3.304748] No ATAGs?
[    3.304779] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    3.304809] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    3.376495] reg-fixed-voltage fixedregulator-vmain: GPIO lookup for consumer (null)
[    3.376495] reg-fixed-voltage fixedregulator-vmain: using device tree for GPIO lookup
[    3.376586] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-vmain[0]'
[    3.376647] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vmain[0]'
[    3.376678] reg-fixed-voltage fixedregulator-vmain: using lookup tables for GPIO lookup
[    3.376678] reg-fixed-voltage fixedregulator-vmain: No GPIO consumer (null) found
[    3.377593] reg-fixed-voltage fixedregulator-v3_3d: GPIO lookup for consumer (null)
[    3.377624] reg-fixed-voltage fixedregulator-v3_3d: using device tree for GPIO lookup
[    3.377685] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-v3_3d[0]'
[    3.377746] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-v3_3d[0]'
[    3.377777] reg-fixed-voltage fixedregulator-v3_3d: using lookup tables for GPIO lookup
[    3.377777] reg-fixed-voltage fixedregulator-v3_3d: No GPIO consumer (null) found
[    3.377868] reg-fixed-voltage fixedregulator-v3_3d: Failed to register regulator: -517
[    3.378082] reg-fixed-voltage fixedregulator-v1_2d: GPIO lookup for consumer (null)
[    3.378082] reg-fixed-voltage fixedregulator-v1_2d: using device tree for GPIO lookup
[    3.378234] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-v1_2d[0]'
[    3.378295] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-v1_2d[0]'
[    3.378295] reg-fixed-voltage fixedregulator-v1_2d: using lookup tables for GPIO lookup
[    3.378326] reg-fixed-voltage fixedregulator-v1_2d: No GPIO consumer (null) found
[    3.378387] V1_2D: supplied by VMAIN
[    3.379638] reg-fixed-voltage fixedregulator-vtt: GPIO lookup for consumer (null)
[    3.379638] reg-fixed-voltage fixedregulator-vtt: using device tree for GPIO lookup
[    3.379699] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-vtt[0]'
[    3.379791] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vtt[0]'
[    3.379791] reg-fixed-voltage fixedregulator-vtt: using lookup tables for GPIO lookup
[    3.379791] reg-fixed-voltage fixedregulator-vtt: No GPIO consumer (null) found
[    3.380004] reg-fixed-voltage fixedregulator-vtt: Failed to register regulator: -517
[    3.382202] iommu: Default domain type: Translated 
[    3.389343] mc: Linux media interface: v0.10
[    3.389465] videodev: Linux video capture interface: v2.00
[    3.389892] pps_core: LinuxPPS API ver. 1 registered
[    3.389923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.389984] PTP clock support registered
[    3.390075] EDAC MC: Ver: 3.0.0
[    3.392608] Advanced Linux Sound Architecture Driver Initialized.
[    3.395660] clocksource: Switched to clocksource 32k_counter
[    3.423431] NET: Registered protocol family 2
[    3.423645] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    3.425292] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    3.425354] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.425384] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    3.425476] TCP: Hash tables configured (established 4096 bind 4096)
[    3.425628] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.425659] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.425994] NET: Registered protocol family 1
[    3.427246] RPC: Registered named UNIX socket transport module.
[    3.427246] RPC: Registered udp transport module.
[    3.427276] RPC: Registered tcp transport module.
[    3.427276] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.427276] PCI: CLS 0 bytes, default 64
[    3.429321] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    3.432189] Initialise system trusted keyrings
[    3.432434] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    3.458801] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.461517] NFS: Registering the id_resolver key type
[    3.461578] Key type id_resolver registered
[    3.461578] Key type id_legacy registered
[    3.461669] ntfs: driver 2.1.32 [Flags: R/O].
[    3.462707] fuse: init (API version 7.32)
[    3.464294] Key type asymmetric registered
[    3.464324] Asymmetric key parser 'x509' registered
[    3.464385] bounce: pool size: 64 pages
[    3.464538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.464569] io scheduler mq-deadline registered
[    3.464569] io scheduler kyber registered
[    4.058258] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[    4.384338] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0)
[    4.384674] gpio gpiochip0: registered GPIOs 0 to 31 on gpio-0-31
[    4.384918] OMAP GPIO hardware version 0.1
[    4.479949] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1)
[    4.480285] gpio gpiochip1: registered GPIOs 32 to 63 on gpio-32-63
[    4.496429] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2)
[    4.496795] gpio gpiochip2: registered GPIOs 64 to 95 on gpio-64-95
[    4.513244] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3)
[    4.513549] gpio gpiochip3: registered GPIOs 96 to 127 on gpio-96-127
[    4.530242] gpio gpiochip4: (gpio-128-159): added GPIO chardev (254:4)
[    4.530578] gpio gpiochip4: registered GPIOs 128 to 159 on gpio-128-159
[    4.546569] gpio gpiochip5: (gpio-160-191): added GPIO chardev (254:5)
[    4.546936] gpio gpiochip5: registered GPIOs 160 to 191 on gpio-160-191
[    4.563995] gpio gpiochip6: (gpio-192-223): added GPIO chardev (254:6)
[    4.564300] gpio gpiochip6: registered GPIOs 192 to 223 on gpio-192-223
[    4.580535] gpio gpiochip7: (gpio-224-255): added GPIO chardev (254:7)
[    4.580902] gpio gpiochip7: registered GPIOs 224 to 255 on gpio-224-255
[    4.595855] i2c i2c-2: GPIO lookup for consumer scl
[    4.595886] i2c i2c-2: using device tree for GPIO lookup
[    4.595977] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
[    4.596038] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
[    4.596069] i2c i2c-2: using lookup tables for GPIO lookup
[    4.596069] i2c i2c-2: No GPIO consumer scl found
[    4.596099] i2c i2c-2: GPIO lookup for consumer sda
[    4.596099] i2c i2c-2: using device tree for GPIO lookup
[    4.596191] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
[    4.596282] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
[    4.596282] i2c i2c-2: using lookup tables for GPIO lookup
[    4.596282] i2c i2c-2: No GPIO consumer sda found
[    4.609039] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz
[    4.656433] i2c i2c-0: GPIO lookup for consumer scl
[    4.656463] i2c i2c-0: using device tree for GPIO lookup
[    4.656555] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[    4.656616] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[    4.656646] i2c i2c-0: using lookup tables for GPIO lookup
[    4.656646] i2c i2c-0: No GPIO consumer scl found
[    4.656707] i2c i2c-0: GPIO lookup for consumer sda
[    4.656738] i2c i2c-0: using device tree for GPIO lookup
[    4.656829] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[    4.656890] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[    4.656921] i2c i2c-0: using lookup tables for GPIO lookup
[    4.656921] i2c i2c-0: No GPIO consumer sda found
[    4.672088] palmas 0-0058: Irq flag is 0x00000004
[    4.687805] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0
[    4.705749] smps12: supplied by regulator-dummy
[    4.707855] smps3: supplied by VMAIN
[    4.709960] smps45: supplied by regulator-dummy
[    4.712158] smps6: supplied by VMAIN
[    4.714141] smps7: supplied by VMAIN
[    4.716888] smps8: supplied by VMAIN
[    4.717834] smps9: supplied by VMAIN
[    4.719299] ldo1: supplied by VMAIN
[    4.721527] ldo2: supplied by VMAIN
[    4.723876] ldo3: supplied by VMAIN
[    4.726104] ldo4: supplied by VMAIN
[    4.728912] LDO5: supplied by regulator-dummy
[    4.729858] LDO6: supplied by regulator-dummy
[    4.730865] LDO7: supplied by regulator-dummy
[    4.731842] LDO8: supplied by regulator-dummy
[    4.732391] ldo9: supplied by VMAIN
[    4.734802] ldoln: supplied by VMAIN
[    4.737030] ldousb: supplied by VMAIN
[    4.753997] gpiochip_find_base: found new base at 504
[    4.754394] gpio gpiochip8: (48070000.i2c:tps659038@58:tps659038_gpio): added GPIO chardev (254:8)
[    4.754760] gpio gpiochip8: registered GPIOs 504 to 511 on 48070000.i2c:tps659038@58:tps659038_gpio
[    4.761535] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    4.819274] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[    4.822570] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[    4.837799] edma 43300000.dma: memcpy is disabled
[    4.856872] edma 43300000.dma: TI EDMA DMA engine driver
[    4.898986] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
[    4.899658] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1>
[    4.899902] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts
[    4.899902] pinctrl-single 4a002e8c.pinmux: 1 pins, size 4
[    4.908538] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/wdt_en[0]' - status (0)
[    4.909240] gpio-export gpios: Allocated GPIO id=0 name='wdt_en'
[    4.909362] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/PFO[0]' - status (0)
[    4.910003] gpio-export gpios: Allocated GPIO id=1 name='PFO'
[    4.910095] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/SET_0[0]' - status (0)
[    4.910736] gpio-export gpios: Allocated GPIO id=2 name='SET_0'
[    4.910797] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/SET_1[0]' - status (0)
[    4.911346] gpio-export gpios: Allocated GPIO id=3 name='SET_1'
[    4.911437] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/N1[0]' - status (0)
[    4.912048] gpio-export gpios: Allocated GPIO id=4 name='N1'
[    4.912109] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/N2[0]' - status (0)
[    4.912658] gpio-export gpios: Allocated GPIO id=5 name='N2'
[    4.912780] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/N4[0]' - status (0)
[    4.913330] gpio-export gpios: Allocated GPIO id=6 name='N4'
[    4.913391] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/N8[0]' - status (0)
[    4.913970] gpio-export gpios: Allocated GPIO id=7 name='N8'
[    4.914062] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/M1[0]' - status (0)
[    4.914581] gpio-export gpios: Allocated GPIO id=8 name='M1'
[    4.914672] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/M2[0]' - status (0)
[    4.915252] gpio-export gpios: Allocated GPIO id=9 name='M2'
[    4.915313] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/M4[0]' - status (0)
[    4.915924] gpio-export gpios: Allocated GPIO id=10 name='M4'
[    4.915985] of_get_named_gpiod_flags: parsed 'gpio' property of node '/gpios/M8[0]' - status (0)
[    4.916503] gpio-export gpios: Allocated GPIO id=11 name='M8'
[    4.916534] gpio-export gpios: ready
[    4.922058] dra7-pcie 51000000.pcie: GPIO lookup for consumer (null)
[    4.922088] dra7-pcie 51000000.pcie: using device tree for GPIO lookup
[    4.922210] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/axi@0/pcie@51000000[0]' - status (0)
[    4.922271] gpio gpiochip6: Persistence not supported for GPIO 18
[    4.922821] dra7-pcie 51000000.pcie: host bridge /ocp/axi@0/pcie@51000000 ranges:
[    4.922882] dra7-pcie 51000000.pcie:       IO 0x0020003000..0x0020012fff -> 0x0000000000
[    4.922973] dra7-pcie 51000000.pcie:      MEM 0x0020013000..0x002fffffff -> 0x0020013000
[    5.923980] dra7-pcie 51000000.pcie: Phy link never came up
[    5.924468] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00
[    5.924499] pci_bus 0000:00: root bus resource [bus 00-ff]
[    5.924530] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    5.924530] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[    5.924591] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400
[    5.924621] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    5.924652] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    5.924774] pci 0000:00:00.0: supports D1
[    5.924774] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    5.933135] PCI: bus0: Fast back to back transfers disabled
[    5.940765] PCI: bus1: Fast back to back transfers enabled
[    5.940826] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    5.940826] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[    5.940856] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    5.942138] pcieport 0000:00:00.0: PME: Signaling with IRQ 185
[    5.942779] pcieport 0000:00:00.0: AER: enabled with IRQ 185
[    6.107788] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    6.117858] omap8250 48020000.serial: GPIO lookup for consumer rs485-term
[    6.117889] omap8250 48020000.serial: using device tree for GPIO lookup
[    6.117980] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0[0]'
[    6.118072] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0[0]'
[    6.118072] omap8250 48020000.serial: using lookup tables for GPIO lookup
[    6.118103] omap8250 48020000.serial: No GPIO consumer rs485-term found
[    6.118225] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 110, base_baud = 3000000) is a 8250
[    6.121124] omap8250 4806a000.serial: GPIO lookup for consumer rs485-term
[    6.121154] omap8250 4806a000.serial: using device tree for GPIO lookup
[    6.121246] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
[    6.121307] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
[    6.121337] omap8250 4806a000.serial: using lookup tables for GPIO lookup
[    6.121337] omap8250 4806a000.serial: No GPIO consumer rs485-term found
[    6.121490] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 120, base_baud = 3000000) is a 8250
[    8.084594] printk: console [ttyS0] enabled
[    8.091491] omap8250 4806c000.serial: GPIO lookup for consumer rs485-term
[    8.098388] omap8250 4806c000.serial: using device tree for GPIO lookup
[    8.105224] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0[0]'
[    8.119384] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0[0]'
[    8.133422] omap8250 4806c000.serial: using lookup tables for GPIO lookup
[    8.140258] omap8250 4806c000.serial: No GPIO consumer rs485-term found
[    8.147064] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 121, base_baud = 3000000) is a 8250
[    8.160919] omap_rng 48090000.rng: Random Number Generator ver. 20
[    8.167327] random: crng init done
[    8.174865] DSS: OMAP DSS rev 6.1
[    8.220458] brd: module loaded
[    8.250244] loop: module loaded
[    8.265777] spi-nor spi0.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    8.280670] mdio_bus fixed-0: GPIO lookup for consumer reset
[    8.286437] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    8.292572] mdio_bus fixed-0: No GPIO consumer reset found
[    8.306488] mdio_bus 48485000.mdio: GPIO lookup for consumer reset
[    8.312744] mdio_bus 48485000.mdio: using device tree for GPIO lookup
[    8.319305] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000[0]'
[    8.333923] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000[0]'
[    8.348388] mdio_bus 48485000.mdio: using lookup tables for GPIO lookup
[    8.355072] mdio_bus 48485000.mdio: No GPIO consumer reset found
[    8.394714] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000
[    8.403472] mdio_bus 48485000.mdio:01: GPIO lookup for consumer reset
[    8.410003] mdio_bus 48485000.mdio:01: using device tree for GPIO lookup
[    8.416870] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@0[0]'
[    8.432861] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@0[0]'
[    8.448638] mdio_bus 48485000.mdio:01: using lookup tables for GPIO lookup
[    8.455566] mdio_bus 48485000.mdio:01: No GPIO consumer reset found
[    8.463592] mdio_bus 48485000.mdio:02: GPIO lookup for consumer reset
[    8.470123] mdio_bus 48485000.mdio:02: using device tree for GPIO lookup
[    8.476989] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@1[0]'
[    8.492950] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@1[0]'
[    8.508728] mdio_bus 48485000.mdio:02: using lookup tables for GPIO lookup
[    8.515686] mdio_bus 48485000.mdio:02: No GPIO consumer reset found
[    8.522766] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver unknown
[    8.530853] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown
[    8.540191] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4
[    8.547058] cpsw-switch 48484000.switch: ALE Table size 1024
[    8.553009] cpsw-switch 48484000.switch: cpts: overflow check period 5000 (jiffies)
[    8.560760] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec
[    8.571990] cpsw-switch 48484000.switch: Detected MACID = 64:1c:10:04:c4:de
[    8.579101] cpsw-switch 48484000.switch: Detected MACID = 64:1c:10:04:c4:df
[    8.595550] cpsw-switch 48484000.switch: initialized (regs 0x0000000048484000, pool size 256) hw_ver:0019010F 1.15 (0)
[    8.607971] i2c /dev entries driver
[    8.613647] IR NEC protocol handler initialized
[    8.618255] IR RC5(x/sz) protocol handler initialized
[    8.623382] IR RC6 protocol handler initialized
[    8.627929] IR JVC protocol handler initialized
[    8.632507] IR Sony protocol handler initialized
[    8.637145] IR SANYO protocol handler initialized
[    8.641906] IR Sharp protocol handler initialized
[    8.646636] IR MCE Keyboard/mouse protocol handler initialized
[    8.652496] IR XMP protocol handler initialized
[    8.672882] sdhci: Secure Digital Host Controller Interface driver
[    8.679138] sdhci: Copyright(c) Pierre Ossman
[    8.684356] sdhci-pltfm: SDHCI platform and OF driver helper
[    8.692138] sdhci-omap 4809c000.mmc: GPIO lookup for consumer cd
[    8.698852] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/wdt[0]' - status (0)
[    8.708557] sdhci-omap 480b4000.mmc: GPIO lookup for consumer wp
[    8.714630] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup
[    8.721221] sdhci-omap 480b4000.mmc: using device tree for GPIO lookup
[    8.727813] gpio gpiochip3: Persistence not supported for GPIO 1
[    8.733917] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]' - status (0)
[    8.747772] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
[    8.760925] gpio-97 (?): no flags found for gpios
[    8.766265] of_get_named_gpiod_flags: parsed 'gpios' property of node '/status-leds/led2[0]' - status (0)
[    8.775909] gpio gpiochip7: Persistence not supported for GPIO 27
[    8.782104] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
[    8.795196] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
[    8.804046] gpio gpiochip1: Persistence not supported for GPIO 3
[    8.810089] gpio-35 (?): no flags found for gpios
[    8.814849] sdhci-omap 480b4000.mmc: using lookup tables for GPIO lookup
[    8.821594] sdhci-omap 4809c000.mmc: Got CD GPIO
[    8.826507] of_get_named_gpiod_flags: parsed 'gpios' property of node '/status-leds/led3[0]' - status (0)
[    8.836151] sdhci-omap 4809c000.mmc: GPIO lookup for consumer wp
[    8.842224] sdhci-omap 480b4000.mmc: No GPIO consumer wp found
[    8.848114] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup
[    8.854888] sdhci-omap 480b4000.mmc: failed to set system capabilities
[    8.861480] gpio gpiochip1: Persistence not supported for GPIO 4
[    8.867614] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
[    8.880737] gpio-36 (?): no flags found for gpios
[    8.889129] of_get_named_gpiod_flags: parsed 'gpios' property of node '/status-leds/led4[0]' - status (0)
[    8.898834] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
[    8.911895] gpio gpiochip1: Persistence not supported for GPIO 5
[    8.917968] gpio-37 (?): no flags found for gpios
[    8.922973] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/status-leds/ETH0_RST[0]'
[    8.932250] sdhci-omap 4809c000.mmc: using lookup tables for GPIO lookup
[    8.939025] sdhci-omap 4809c000.mmc: No GPIO consumer wp found
[    8.944976] of_get_named_gpiod_flags: parsed 'gpio' property of node '/status-leds/ETH0_RST[0]' - status (0)
[    8.955444] gpio gpiochip3: Persistence not supported for GPIO 0
[    8.961547] gpio-96 (?): no flags found for gpio
[    8.967864] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/status-leds/ETH1_RST[0]'
[    8.977386] of_get_named_gpiod_flags: parsed 'gpio' property of node '/status-leds/ETH1_RST[0]' - status (0)
[    8.987304] gpio gpiochip0: Persistence not supported for GPIO 31
[    8.993469] gpio-31 (?): no flags found for gpio
[    8.999114] ledtrig-cpu: registered to indicate activity on CPUs
[    9.011383] NET: Registered protocol family 17
[    9.016204] Key type dns_resolver registered
[    9.020660] Registering SWP/SWPB emulation handler
[    9.025482] omap_voltage_late_init: Voltage driver support not added
[    9.031890] Power Management for TI OMAP4+ devices.
[    9.037445] Loading compiled-in X.509 certificates
[    9.042480] kmemleak: Kernel memory leak detector initialized (mem pool available: 15772)
[    9.050720] kmemleak: Automatic memory scanning thread started
[    9.148284] dmm 4e000000.dmm: workaround for errata i878 in use
[    9.156158] dmm 4e000000.dmm: initialized all PAT entries
[    9.162475] reg-fixed-voltage fixedregulator-v3_3d: GPIO lookup for consumer (null)
[    9.170227] reg-fixed-voltage fixedregulator-v3_3d: using device tree for GPIO lookup
[    9.178192] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-v3_3d[0]'
[    9.187530] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-v3_3d[0]'
[    9.196716] reg-fixed-voltage fixedregulator-v3_3d: using lookup tables for GPIO lookup
[    9.204803] reg-fixed-voltage fixedregulator-v3_3d: No GPIO consumer (null) found
[    9.212463] V3_3D: supplied by smps9
[    9.218017] reg-fixed-voltage fixedregulator-vtt: GPIO lookup for consumer (null)
[    9.225585] reg-fixed-voltage fixedregulator-vtt: using device tree for GPIO lookup
[    9.233367] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-vtt[0]'
[    9.242523] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vtt[0]'
[    9.251556] reg-fixed-voltage fixedregulator-vtt: using lookup tables for GPIO lookup
[    9.259460] reg-fixed-voltage fixedregulator-vtt: No GPIO consumer (null) found
[    9.266876] vtt_fixed: supplied by V3_3D
[    9.273925] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[    9.285064] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[    9.292541] platform 40800000.dsp: Adding to iommu group 0
[    9.301849] omap-iommu 58882000.mmu: 58882000.mmu registered
[    9.309082] platform 58820000.ipu: Adding to iommu group 1
[    9.318450] omap-iommu 55082000.mmu: 55082000.mmu registered
[    9.325592] platform 55020000.ipu: Adding to iommu group 2
[    9.335937] sdhci-omap 480b4000.mmc: GPIO lookup for consumer wp
[    9.342926] sdhci-omap 4809c000.mmc: GPIO lookup for consumer cd
[    9.349853] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup
[    9.356475] sdhci-omap 480b4000.mmc: using device tree for GPIO lookup
[    9.365173] ALSA device list:
[    9.368347] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]' - status (0)
[    9.382263] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
[    9.395446]   No soundcards found.
[    9.399810] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
[    9.412902] gpio gpiochip7: Persistence not supported for GPIO 27
[    9.419067] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
[    9.427947] sdhci-omap 480b4000.mmc: using lookup tables for GPIO lookup
[    9.434692] sdhci-omap 4809c000.mmc: Got CD GPIO
[    9.439392] sdhci-omap 480b4000.mmc: No GPIO consumer wp found
[    9.445251] sdhci-omap 4809c000.mmc: GPIO lookup for consumer wp
[    9.452056] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup
[    9.459320] sdhci-omap 480b4000.mmc: no pinctrl state for ddr_3_3v mode
[    9.466125] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
[    9.480346] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
[    9.493469] sdhci-omap 4809c000.mmc: using lookup tables for GPIO lookup
[    9.500274] sdhci-omap 4809c000.mmc: No GPIO consumer wp found
[    9.508300] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[    9.514984] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA
[    9.550140] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
[    9.561676] Waiting for root device /dev/mmcblk1p2...
[    9.616241] mmc1: new high speed MMC card at address 0001
[    9.624572] mmcblk1: mmc1:0001 008GB0 7.28 GiB 
[    9.630462] mmcblk1boot0: mmc1:0001 008GB0 partition 1 8.00 MiB
[    9.637786] mmcblk1boot1: mmc1:0001 008GB0 partition 2 8.00 MiB
[    9.644134] mmcblk1rpmb: mmc1:0001 008GB0 partition 3 4.00 MiB, chardev (244:0)
[    9.655426]  mmcblk1: p1 p2 p3 p4
[    9.925781] EXT4-fs (mmcblk1p2): 4 orphan inodes deleted
[    9.931243] EXT4-fs (mmcblk1p2): recovery complete
[    9.942291] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    9.950531] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    9.957916] devtmpfs: mounted
[    9.962005] Freeing unused kernel memory: 2048K
[    9.966796] Run /sbin/init as init process
[    9.970947]   with arguments:
[    9.973968]     /sbin/init
[    9.976715]   with environment:
[    9.979858]     HOME=/
[    9.982238]     TERM=linux
[    9.984985]     soc=am5718
[    9.987731]     board=myhostname
[    9.991241]     rfsuse=buildroot
[    9.994506]     bootdev=emmc
[   10.124237] systemd[1]: System time before build time, advancing clock.
[   10.159606] systemd[1]: Configuration file /etc/systemd/system.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
[   10.176910] systemd[1]: systemd 244 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[   10.198944] systemd[1]: Detected architecture arm.
[   10.224456] systemd[1]: Set hostname to <myhostname>.
[   10.560272] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[   10.569335] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[   10.691345] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[   10.703857] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[   10.719512] systemd[1]: Created slice system-getty.slice.
[   10.736663] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   10.754302] systemd[1]: Created slice User and Session Slice.
[   10.770141] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.788116] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.804931] systemd[1]: Reached target Network is Online.
[   10.818817] systemd[1]: Reached target Host and Network Name Lookups.
[   10.833831] systemd[1]: Reached target Paths.
[   10.845855] systemd[1]: Reached target Remote File Systems.
[   10.859832] systemd[1]: Reached target Slices.
[   10.871856] systemd[1]: Reached target Swap.
[   10.886230] systemd[1]: Listening on RPCbind Server Activation Socket.
[   10.901855] systemd[1]: Reached target RPC Port Mapper.
[   10.924377] systemd[1]: Listening on Process Core Dump Socket.
[   10.940063] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.963623] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[   10.973327] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.988525] systemd[1]: Listening on Journal Socket.
[   11.002319] systemd[1]: Listening on udev Control Socket.
[   11.017211] systemd[1]: Listening on udev Kernel Socket.
[   11.031280] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   11.051086] systemd[1]: Mounting POSIX Message Queue File System...
[   11.076782] systemd[1]: Mounting Kernel Debug File System...
[   11.101593] systemd[1]: Mounting Temporary Directory (/tmp)...
[   11.120178] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[   11.138610] systemd[1]: Starting RPC Bind...
[   11.152984] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   11.173431] systemd[1]: Starting Journal Service...
[   11.206390] systemd-journald[97]: Configuration file /etc/systemd/journald.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
[   11.224548] systemd[1]: Starting Load Kernel Modules...
[   11.270416] systemd[1]: Starting Remount Root and Kernel File Systems...
[   11.314147] systemd[1]: Starting udev Coldplug all Devices...
[   11.342864] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[   11.391113] systemd[1]: Started RPC Bind.
[   11.413421] systemd[1]: Mounted POSIX Message Queue File System.
[   11.438262] systemd[1]: Mounted Kernel Debug File System.
[   11.459289] systemd[1]: Mounted Temporary Directory (/tmp).
[   11.484771] systemd[1]: Started Load Kernel Modules.
[   11.514587] systemd[1]: Started Remount Root and Kernel File Systems.
[   11.558227] systemd[1]: Mounting FUSE Control File System...
[   11.606262] systemd[1]: Mounting Kernel Configuration File System...
[   11.657470] systemd[1]: Started NFS status monitor for NFSv2/3 locking..
[   11.699340] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   11.758392] systemd[1]: Starting Apply Kernel Variables...
[   11.794952] systemd[1]: Condition check resulted in Create System Users being skipped.
[   11.848846] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.891998] systemd[1]: Mounted FUSE Control File System.
[   11.928253] systemd[1]: Mounted Kernel Configuration File System.
[   11.961975] systemd[1]: Started Apply Kernel Variables.
[   11.994903] systemd[1]: Started Create Static Device Nodes in /dev.
[   12.026458] systemd[1]: Started Journal Service.
[   12.158660] systemd-journald[97]: Received client request to flush runtime journal.
[   13.853576] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000
[   14.019073] remoteproc remoteproc0: 58820000.ipu is available
[   14.039855] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[   14.112060] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[   14.124542] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
[   14.154022] omap-sham 4b101000.sham: will run requests pump with realtime priority
[   14.195831] remoteproc remoteproc0: powering up 58820000.ipu
[   14.225189] remoteproc remoteproc1: 55020000.ipu is available
[   14.305297] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[   14.366424] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000
[   14.446014] omap-sham 42701000.sham: hw accel on OMAP rev 4.3
[   14.502746] remoteproc remoteproc0: request_firmware failed: -2
[   14.531738] omap-sham 42701000.sham: will run requests pump with realtime priority
[   14.559631] remoteproc remoteproc2: 40800000.dsp is available
[   14.640563] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[   14.778747] remoteproc remoteproc1: powering up 55020000.ipu
[   14.897583] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[   14.999603] rtc-ds1307 2-0068: read: 01 48 09 05 17 04 25
[   15.081756] remoteproc remoteproc1: request_firmware failed: -2
[   15.119750] rtc-ds1307 2-0068: read secs=1, mins=48, hours=9, mday=17, mon=3, year=125, wday=4
[   15.323150] rtc-ds1307 2-0068: char device (253:0)
[   15.440917] gpiochip_find_base: found new base at 496
[   15.455993] rtc-ds1307 2-0068: registered as rtc0
[   15.490478] Driver for 1-wire Dallas network protocol.
[   15.535400] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[   15.556335] rtc-ds1307 2-0068: read: 01 48 09 05 17 04 25
[   15.576416] gpio gpiochip9: (tpic2810): added GPIO chardev (254:9)
[   15.595642] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: char device (253:1)
[   15.606140] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer id
[   15.670898] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode
[   15.683990] rtc-ds1307 2-0068: read secs=1, mins=48, hours=9, mday=17, mon=3, year=125, wday=4
[   15.709075] omap-des 480a5000.des: will run requests pump with realtime priority
[   15.733917] gpio gpiochip9: registered GPIOs 496 to 503 on tpic2810
[   15.767700] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: registered as rtc1
[   15.786895] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup
[   15.837615] rtc-ds1307 2-0068: setting system clock to 2025-04-17T09:48:01 UTC (1744883281)
[   15.941833] of_get_named_gpiod_flags: can't parse 'id-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tps659038@58/tps659038_usb[0]'
[   16.012390] remoteproc remoteproc2: powering up 40800000.dsp
[   16.047973] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d
[   16.112396] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21121208
[   16.228393] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered.
[   16.250488] of_get_named_gpiod_flags: parsed 'id-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tps659038@58/tps659038_usb[0]' - status (0)
[   16.274108] pisosr-gpio spi2.0: GPIO lookup for consumer load
[   16.294952] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0
[   16.429779] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0
[   16.436645] pisosr-gpio spi2.0: using device tree for GPIO lookup
[   16.543426] of_get_named_gpiod_flags: parsed 'load-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@b8000/spi@0/sn65hvs882@0[0]' - status (0)
[   16.621643] gpio gpiochip6: Persistence not supported for GPIO 7
[   16.699188] CAN device driver interface
[   16.738739] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer vbus
[   16.795989]  remoteproc2#vdev0buffer: assigned reserved memory node dsp1-memory@99000000
[   16.874053] gpio gpiochip3: Persistence not supported for GPIO 23
[   16.885345] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=c18511b2, irq=109)
[   16.916778] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup
[   16.989013] virtio_rpmsg_bus virtio0: rpmsg host is online
[   17.010589] gpiochip_find_base: found new base at 488
[   17.096832]  remoteproc2#vdev0buffer: registered virtio0 (type 7)
[   17.110809] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tps659038@58/tps659038_usb[0]'
[   17.129058] gpio gpiochip10: (pisosr-gpio): added GPIO chardev (254:10)
[   17.143249] c_can_platform 48480000.can: c_can_platform device registered (regs=5b8acf6f, irq=136)
[   17.245697] remoteproc remoteproc2: remote processor 40800000.dsp is now up
[   17.285003] gpio gpiochip10: registered GPIOs 488 to 495 on pisosr-gpio
[   17.352050] omap_rtc 48838000.rtc: char device (253:2)
[   17.428405] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d
[   17.461700] of_get_named_gpiod_flags: parsed 'vbus-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tps659038@58/tps659038_usb[0]' - status (0)
[   17.482849] omap_rtc 48838000.rtc: registered as rtc2
[   17.570343] omap_rtc 48838000.rtc: GPIO lookup for consumer wp
[   17.683715] omap_rtc 48838000.rtc: using device tree for GPIO lookup
[   17.777801] gpio gpiochip1: Persistence not supported for GPIO 22
[   17.808837] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48800000/segment@0/target-module@38000/rtc@0[0]'
[   17.906829] omap_gpio 4805b000.gpio: Could not set line 7 debounce to 20000 microseconds (-22)
[   18.068786] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48800000/segment@0/target-module@38000/rtc@0[0]'
[   18.325714] omap_rtc 48838000.rtc: using lookup tables for GPIO lookup
[   18.432861] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
[   18.449707] omap_rtc 48838000.rtc: No GPIO consumer wp found
[   18.457092] vpe 489d0000.vpe: Device registered as /dev/video0
[   20.097015] SCSI subsystem initialized
[   20.300994] libata version 3.00 loaded.
[   20.451263] ahci 4a140000.sata: supply ahci not found, using dummy regulator
[   20.614959] ahci 4a140000.sata: supply phy not found, using dummy regulator
[   20.638885] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[   20.778961] ahci 4a140000.sata: supply target not found, using dummy regulator
[   20.934204] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1
[   21.050811] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[   21.209655] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[   21.215667] ahci 4a140000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst 
[   21.279083] mdio_bus 4b232400.mdio: GPIO lookup for consumer reset
[   21.340759] omap-aes 4b500000.aes: will run requests pump with realtime priority
[   21.367340] pvrsrvkm: disagrees about version of symbol module_layout
[   21.392089] mdio_bus 4b232400.mdio: using device tree for GPIO lookup
[   21.424133] scsi host0: ahci
[   21.492340] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 33
[   21.505432] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp/target-module@4b226000/pruss@0/mdio@32400[0]' - status (0)
[   21.533325] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[   21.595336] omap-aes 4b700000.aes: will run requests pump with realtime priority
[   21.610778] pvrsrvkm: disagrees about version of symbol module_layout
[   21.717651] gpio gpiochip6: Persistence not supported for GPIO 8
[   21.870727] davinci_mdio 4b232400.mdio: davinci mdio revision 1.6, bus freq 1000000
[   21.946960] ata1: SATA link down (SStatus 0 SControl 300)
[   22.072204] davinci_mdio 4b232400.mdio: timed out waiting for user access
[   22.238525] davinci_mdio 4b232400.mdio: timed out waiting for idle
[   22.407867] davinci_mdio: probe of 4b232400.mdio failed with error -5
[   22.798797] mdio_bus 4b2b2400.mdio: GPIO lookup for consumer reset
[   22.901733] mdio_bus 4b2b2400.mdio: using device tree for GPIO lookup
[   23.026794] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp/target-module@4b2a6000/pruss@0/mdio@32400[0]' - status (0)
[   23.277740] gpio gpiochip6: Persistence not supported for GPIO 9
[   23.399230] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000
[   23.552703] davinci_mdio 4b2b2400.mdio: timed out waiting for user access
[   23.711730] davinci_mdio 4b2b2400.mdio: timed out waiting for idle
[   23.775970] davinci_mdio: probe of 4b2b2400.mdio failed with error -5
[   25.242584] NET: Registered protocol family 45
[   25.476745] remoteproc remoteproc3: 4b234000.pru is available
[   25.585906] remoteproc remoteproc4: 4b238000.pru is available
[   25.717041] remoteproc remoteproc5: 4b2b4000.pru is available
[   25.813751] remoteproc remoteproc6: 4b2b8000.pru is available
[   25.925872] usbcore: registered new interface driver usbfs
[   26.000671] usbcore: registered new interface driver hub
[   26.040252] usbcore: registered new device driver usb
[   26.075836] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   26.087799] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[   26.106445] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[   26.125885] xhci-hcd xhci-hcd.1.auto: irq 194, io mem 0x48890000
[   26.149810] hub 1-0:1.0: USB hub found
[   26.154815] hub 1-0:1.0: 1 port detected
[   26.170410] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   26.187896] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[   26.205749] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[   26.220916] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   26.242370] hub 2-0:1.0: USB hub found
[   26.250854] hub 2-0:1.0: 1 port detected
[   26.267395] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   26.283813] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[   26.302520] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[   26.323852] xhci-hcd xhci-hcd.2.auto: irq 198, io mem 0x488d0000
[   26.343414] hub 3-0:1.0: USB hub found
[   26.351806] hub 3-0:1.0: 1 port detected
[   26.365417] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   26.383880] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[   26.401763] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[   26.416931] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   26.438415] hub 4-0:1.0: USB hub found
[   26.446807] hub 4-0:1.0: 1 port detected
[   27.269378] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[   27.298065] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null)
[   28.418975] Initializing XFRM netlink socket
[   28.558959] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[   28.631042] Generic PHY 48485000.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=POLL)
[   29.337463] rtc-ds1307 2-0068: write secs=15, mins=48, hours=9, mday=17, mon=3, year=125, wday=4
[   29.346740] rtc-ds1307 2-0068: write: 15 48 09 05 17 04 25
[   29.357818] rtc-ds1307 2-0068: read: 15 48 09 05 17 04 25
[   29.378051] rtc-ds1307 2-0068: read secs=15, mins=48, hours=9, mday=17, mon=3, year=125, wday=4
[   38.024322] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[   38.050750] Generic PHY 48485000.mdio:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=48485000.mdio:02, irq=POLL)
[   38.083221] cpsw-switch 48484000.switch eth1: Link is Up - 1Gbps/Full - flow control off
[   47.225463] pvrsrvkm: disagrees about version of symbol module_layout
[   48.069488] pvrsrvkm: disagrees about version of symbol module_layout
[   51.278045] kmemleak: Kernel memory leak detector disabled
[   51.283691] kmemleak: Automatic memory scanning thread ended
[   51.330566] cmemk: loading out-of-tree module taints kernel.
[   51.343017] CMEMK module: reference Linux version 5.10.100
[   51.364898] cmemk initialized
[   51.982727] cpsw-switch 48484000.switch eth1: Link is Down
[   52.038360] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[   52.074523] Generic PHY 48485000.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=POLL)
[   52.119049] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[   52.137664] Generic PHY 48485000.mdio:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=48485000.mdio:02, irq=POLL)
[   63.455139] cpsw-switch 48484000.switch eth1: Link is Up - 1Gbps/Full - flow control off
[  336.556884] galcore: disagrees about version of symbol module_layout
[ 1161.562316] galcore: disagrees about version of symbol module_layout
[ 1187.353027] galcore: disagrees about version of symbol module_layout
[ 1238.421783] galcore: disagrees about version of symbol module_layout
[ 1263.707366] pvrsrvkm: disagrees about version of symbol module_layout
[ 1273.446502] cmemk: disagrees about version of symbol module_layout

这是全部的linux boot logs，最后面就是我要在板卡上安装外部驱动，使用的是编译好的标准SDK08.02中的.ko文件，但是都出现disagrees about version of symbol module_layout错误

需要时间看一下，等待帖子回复。

您好！

可以尽快帮忙看看问题吗？

非常感谢！

休假原因，答复有所延迟，请耐心等待。

通常会使用insmod加载模块或modprobe。您遇到的问题是，您加载的模块不是同时构建的，或者版本存在差异。请参阅以下内容：

https://unix.stackexchange.com/questions/12824/possible-to-load-kernel-module-that-disagrees-about-version-of-symbol

顺便问一下，当电路板正常初始化时，有一个由systemd调用的脚本，你能在加载后尝试运行它吗。。请参阅/etc/init.d/rc.pvr脚本。

你能解释一下为什么你的模块和内核存在版本差异吗？
你是故意制作不同版本的吗？

回答第一个问题，我的板卡内核与要加载的gpu模块驱动确实不是同时构建的，这也许导致了错误；我也尝试去解压相同版本的文件系统并找到编译好的gpu驱动文件，但不幸的是，用这个文件安装仍然出现版本不同的错误。所以，在使用了不同的交叉编译软件等等编译了内核之后，都会导致这个错误吗？

回答这个问题（你能解释一下为什么你的模块和内核存在版本差异吗？）：我使用uname -r命令检查内核版本，主机和板卡都是5.10.100-g7a7a3af903相同的内核版本，因为板卡系统内核并不是我构建的，具体的差异我不是特别清楚。

我尝试调用这个rc.pvr脚本，来安装gpu驱动，但是得到相同的版本错误问题

你能同时建造它们吗？如果需要，为什么不能使用GPU驱动程序构建内核？

“我也尝试去解压相同版本的文件系统并找到编译好的gpu驱动文件，但不幸的是，用这个文件安装仍然出现版本不同的错误。所以，在使用了不同的交叉编译软件等等编译了内核之后，都会导致这个错误吗？”

不确定，我会在内部征求意见。
重现此问题的方法是什么？
您是否只是从内核构建中删除pvrsrvkm模块，然后继续尝试添加它？

你能一步一步地分享你的程序吗？

我现在尝试构建内核的同时编译构建gpu驱动，重新制作系统，但是在编译SGX这个gpu驱动时，

make ti-sgx-ddk-km_install
================================
Installing ti-sgx-ddk-km
================================
make[1]: 进入目录“/home/dong/ti-processor-sdk-linux-am57xx-evm-08_02_01_00/board-support/linux-5.10.100+gitAUTOINC+7a7a3af903-g7a7a3af903”
INSTALL arch/arm/crypto/aes-arm-bs.ko
INSTALL arch/arm/crypto/aes-arm-ce.ko
INSTALL arch/arm/crypto/aes-arm.ko
INSTALL arch/arm/crypto/chacha-neon.ko
INSTALL arch/arm/crypto/crc32-arm-ce.ko
INSTALL arch/arm/crypto/ghash-arm-ce.ko
INSTALL arch/arm/crypto/sha1-arm-ce.ko
INSTALL arch/arm/crypto/sha1-arm-neon.ko
INSTALL arch/arm/crypto/sha1-arm.ko
INSTALL arch/arm/crypto/sha2-arm-ce.ko
INSTALL arch/arm/crypto/sha256-arm.ko
INSTALL arch/arm/crypto/sha512-arm.ko
INSTALL crypto/aes_generic.ko
INSTALL crypto/af_alg.ko
INSTALL crypto/algif_aead.ko
INSTALL crypto/algif_hash.ko
INSTALL crypto/algif_rng.ko
INSTALL crypto/algif_skcipher.ko
INSTALL crypto/authenc.ko
INSTALL crypto/authencesn.ko
INSTALL crypto/cbc.ko
INSTALL crypto/ccm.ko
INSTALL crypto/cmac.ko
INSTALL crypto/cryptd.ko
INSTALL crypto/crypto_engine.ko
INSTALL crypto/crypto_simd.ko
INSTALL crypto/crypto_user.ko
INSTALL crypto/ctr.ko
INSTALL crypto/drbg.ko
INSTALL crypto/ecb.ko
INSTALL crypto/ecc.ko
INSTALL crypto/ecdh_generic.ko
INSTALL crypto/echainiv.ko
INSTALL crypto/gcm.ko
INSTALL crypto/gf128mul.ko
INSTALL crypto/ghash-generic.ko
INSTALL crypto/hmac.ko
INSTALL crypto/jitterentropy_rng.ko
INSTALL crypto/md4.ko
INSTALL crypto/md5.ko
INSTALL crypto/seqiv.ko
INSTALL crypto/sha256_generic.ko
INSTALL crypto/sha512_generic.ko
INSTALL crypto/tcrypt.ko
INSTALL drivers/ata/ahci.ko
INSTALL drivers/ata/ahci_dm816.ko
INSTALL drivers/ata/ahci_platform.ko
INSTALL drivers/ata/libahci.ko
INSTALL drivers/ata/libahci_platform.ko
INSTALL drivers/ata/libata.ko
INSTALL drivers/ata/sata_mv.ko
INSTALL drivers/bcma/bcma.ko
INSTALL drivers/bluetooth/btbcm.ko
INSTALL drivers/bluetooth/btmrvl.ko
INSTALL drivers/bluetooth/btmrvl_sdio.ko
INSTALL drivers/bluetooth/hci_uart.ko
INSTALL drivers/char/tpm/tpm.ko
INSTALL drivers/char/tpm/tpm_i2c_infineon.ko
INSTALL drivers/crypto/omap-aes-driver.ko
INSTALL drivers/crypto/omap-crypto.ko
INSTALL drivers/crypto/omap-des.ko
INSTALL drivers/crypto/omap-sham.ko
INSTALL drivers/edac/ti_edac.ko
INSTALL drivers/extcon/extcon-palmas.ko
INSTALL drivers/extcon/extcon-usb-gpio.ko
INSTALL drivers/firmware/efi/capsule-loader.ko
INSTALL drivers/fsi/fsi-core.ko
INSTALL drivers/fsi/fsi-master-aspeed.ko
INSTALL drivers/fsi/fsi-master-gpio.ko
INSTALL drivers/fsi/fsi-master-hub.ko
INSTALL drivers/fsi/fsi-occ.ko
INSTALL drivers/fsi/fsi-sbefifo.ko
INSTALL drivers/fsi/fsi-scom.ko
INSTALL drivers/gpio/gpio-pisosr.ko
INSTALL drivers/gpio/gpio-tpic2810.ko
INSTALL drivers/gpu/drm/bridge/cadence/cdns-mhdp8546.ko
INSTALL drivers/gpu/drm/bridge/simple-bridge.ko
INSTALL drivers/gpu/drm/bridge/synopsys/dw-hdmi.ko
INSTALL drivers/gpu/drm/imx/dw_hdmi-imx.ko
INSTALL drivers/gpu/drm/imx/imx-ldb.ko
INSTALL drivers/gpu/drm/imx/imx-tve.ko
INSTALL drivers/gpu/drm/imx/imxdrm.ko
INSTALL drivers/gpu/drm/imx/parallel-display.ko
INSTALL drivers/gpu/ipu-v3/imx-ipu-v3.ko
INSTALL drivers/hid/hid-multitouch.ko
INSTALL drivers/hid/usbhid/usbhid.ko
INSTALL drivers/hwmon/aspeed-pwm-tacho.ko
INSTALL drivers/hwmon/ina2xx.ko
INSTALL drivers/hwmon/ntc_thermistor.ko
INSTALL drivers/hwmon/pwm-fan.ko
INSTALL drivers/i2c/busses/i2c-emev2.ko
INSTALL drivers/i2c/muxes/i2c-arb-gpio-challenge.ko
INSTALL drivers/iio/adc/cpcap-adc.ko
INSTALL drivers/iio/adc/ti_am335x_adc.ko
INSTALL drivers/iio/adc/vf610_adc.ko
INSTALL drivers/iio/buffer/industrialio-buffer-cb.ko
INSTALL drivers/iio/light/cm36651.ko
INSTALL drivers/input/keyboard/matrix_keypad.ko
INSTALL drivers/input/keyboard/qt1070.ko
INSTALL drivers/input/keyboard/samsung-keypad.ko
INSTALL drivers/input/matrix-keymap.ko
INSTALL drivers/input/misc/adxl34x-i2c.ko
INSTALL drivers/input/misc/adxl34x-spi.ko
INSTALL drivers/input/misc/adxl34x.ko
INSTALL drivers/input/misc/cpcap-pwrbutton.ko
INSTALL drivers/input/misc/gpio_decoder.ko
INSTALL drivers/input/mouse/cyapatp.ko
INSTALL drivers/input/touchscreen/atmel_mxt_ts.ko
INSTALL drivers/input/touchscreen/edt-ft5x06.ko
INSTALL drivers/input/touchscreen/elants_i2c.ko
INSTALL drivers/input/touchscreen/goodix.ko
INSTALL drivers/input/touchscreen/mms114.ko
INSTALL drivers/input/touchscreen/pixcir_i2c_ts.ko
INSTALL drivers/input/touchscreen/resistive-adc-touch.ko
INSTALL drivers/input/touchscreen/st1232.ko
INSTALL drivers/input/touchscreen/ti_am335x_tsc.ko
INSTALL drivers/irqchip/irq-pruss-intc.ko
INSTALL drivers/leds/led-class-flash.ko
INSTALL drivers/leds/leds-cpcap.ko
INSTALL drivers/media/common/v4l2-tpg/v4l2-tpg.ko
INSTALL drivers/media/common/videobuf2/videobuf2-vmalloc.ko
INSTALL drivers/media/dvb-frontends/a8293.ko
INSTALL drivers/media/dvb-frontends/af9013.ko
INSTALL drivers/media/dvb-frontends/af9033.ko
INSTALL drivers/media/dvb-frontends/ascot2e.ko
INSTALL drivers/media/dvb-frontends/atbm8830.ko
INSTALL drivers/media/dvb-frontends/au8522_common.ko
INSTALL drivers/media/dvb-frontends/au8522_decoder.ko
INSTALL drivers/media/dvb-frontends/au8522_dig.ko
INSTALL drivers/media/dvb-frontends/bcm3510.ko
INSTALL drivers/media/dvb-frontends/cx22700.ko
INSTALL drivers/media/dvb-frontends/cx22702.ko
INSTALL drivers/media/dvb-frontends/cx24110.ko
INSTALL drivers/media/dvb-frontends/cx24113.ko
INSTALL drivers/media/dvb-frontends/cx24116.ko
INSTALL drivers/media/dvb-frontends/cx24117.ko
INSTALL drivers/media/dvb-frontends/cx24120.ko
INSTALL drivers/media/dvb-frontends/cx24123.ko
INSTALL drivers/media/dvb-frontends/cxd2099.ko
INSTALL drivers/media/dvb-frontends/cxd2820r.ko
INSTALL drivers/media/dvb-frontends/cxd2841er.ko
INSTALL drivers/media/dvb-frontends/cxd2880/cxd2880.ko
INSTALL drivers/media/dvb-frontends/dib0070.ko
INSTALL drivers/media/dvb-frontends/dib0090.ko
INSTALL drivers/media/dvb-frontends/dib3000mb.ko
INSTALL drivers/media/dvb-frontends/dib3000mc.ko
INSTALL drivers/media/dvb-frontends/dib7000m.ko
INSTALL drivers/media/dvb-frontends/dib7000p.ko
INSTALL drivers/media/dvb-frontends/dib8000.ko
INSTALL drivers/media/dvb-frontends/dib9000.ko
INSTALL drivers/media/dvb-frontends/dibx000_common.ko
INSTALL drivers/media/dvb-frontends/drx39xyj/drx39xyj.ko
INSTALL drivers/media/dvb-frontends/drxd.ko
INSTALL drivers/media/dvb-frontends/drxk.ko
INSTALL drivers/media/dvb-frontends/ds3000.ko
INSTALL drivers/media/dvb-frontends/dvb-pll.ko
INSTALL drivers/media/dvb-frontends/ec100.ko
INSTALL drivers/media/dvb-frontends/helene.ko
INSTALL drivers/media/dvb-frontends/horus3a.ko
INSTALL drivers/media/dvb-frontends/isl6405.ko
INSTALL drivers/media/dvb-frontends/isl6421.ko
INSTALL drivers/media/dvb-frontends/isl6423.ko
INSTALL drivers/media/dvb-frontends/itd1000.ko
INSTALL drivers/media/dvb-frontends/ix2505v.ko
INSTALL drivers/media/dvb-frontends/l64781.ko
INSTALL drivers/media/dvb-frontends/lg2160.ko
INSTALL drivers/media/dvb-frontends/lgdt3305.ko
INSTALL drivers/media/dvb-frontends/lgdt3306a.ko
INSTALL drivers/media/dvb-frontends/lgdt330x.ko
INSTALL drivers/media/dvb-frontends/lgs8gl5.ko
INSTALL drivers/media/dvb-frontends/lgs8gxx.ko
INSTALL drivers/media/dvb-frontends/lnbh25.ko
INSTALL drivers/media/dvb-frontends/lnbh29.ko
INSTALL drivers/media/dvb-frontends/lnbp21.ko
INSTALL drivers/media/dvb-frontends/lnbp22.ko
INSTALL drivers/media/dvb-frontends/m88ds3103.ko
INSTALL drivers/media/dvb-frontends/m88rs2000.ko
INSTALL drivers/media/dvb-frontends/mb86a16.ko
INSTALL drivers/media/dvb-frontends/mb86a20s.ko
INSTALL drivers/media/dvb-frontends/mn88443x.ko
INSTALL drivers/media/dvb-frontends/mn88472.ko
INSTALL drivers/media/dvb-frontends/mn88473.ko
INSTALL drivers/media/dvb-frontends/mt312.ko
INSTALL drivers/media/dvb-frontends/mt352.ko
INSTALL drivers/media/dvb-frontends/mxl5xx.ko
INSTALL drivers/media/dvb-frontends/nxt200x.ko
INSTALL drivers/media/dvb-frontends/nxt6000.ko
INSTALL drivers/media/dvb-frontends/or51132.ko
INSTALL drivers/media/dvb-frontends/or51211.ko
INSTALL drivers/media/dvb-frontends/rtl2830.ko
INSTALL drivers/media/dvb-frontends/rtl2832.ko
INSTALL drivers/media/dvb-frontends/rtl2832_sdr.ko
INSTALL drivers/media/dvb-frontends/s5h1409.ko
INSTALL drivers/media/dvb-frontends/s5h1411.ko
INSTALL drivers/media/dvb-frontends/s5h1420.ko
INSTALL drivers/media/dvb-frontends/s5h1432.ko
INSTALL drivers/media/dvb-frontends/s921.ko
INSTALL drivers/media/dvb-frontends/si2165.ko
INSTALL drivers/media/dvb-frontends/si2168.ko
INSTALL drivers/media/dvb-frontends/si21xx.ko
INSTALL drivers/media/dvb-frontends/sp2.ko
INSTALL drivers/media/dvb-frontends/sp8870.ko
INSTALL drivers/media/dvb-frontends/sp887x.ko
INSTALL drivers/media/dvb-frontends/stb0899.ko
INSTALL drivers/media/dvb-frontends/stb6000.ko
INSTALL drivers/media/dvb-frontends/stb6100.ko
INSTALL drivers/media/dvb-frontends/stv0288.ko
INSTALL drivers/media/dvb-frontends/stv0297.ko
INSTALL drivers/media/dvb-frontends/stv0299.ko
INSTALL drivers/media/dvb-frontends/stv0367.ko
INSTALL drivers/media/dvb-frontends/stv0900.ko
INSTALL drivers/media/dvb-frontends/stv090x.ko
INSTALL drivers/media/dvb-frontends/stv0910.ko
INSTALL drivers/media/dvb-frontends/stv6110.ko
INSTALL drivers/media/dvb-frontends/stv6110x.ko
INSTALL drivers/media/dvb-frontends/stv6111.ko
INSTALL drivers/media/dvb-frontends/tc90522.ko
INSTALL drivers/media/dvb-frontends/tda10021.ko
INSTALL drivers/media/dvb-frontends/tda10023.ko
INSTALL drivers/media/dvb-frontends/tda10048.ko
INSTALL drivers/media/dvb-frontends/tda1004x.ko
INSTALL drivers/media/dvb-frontends/tda10071.ko
INSTALL drivers/media/dvb-frontends/tda10086.ko
INSTALL drivers/media/dvb-frontends/tda18271c2dd.ko
INSTALL drivers/media/dvb-frontends/tda665x.ko
INSTALL drivers/media/dvb-frontends/tda8083.ko
INSTALL drivers/media/dvb-frontends/tda8261.ko
INSTALL drivers/media/dvb-frontends/tda826x.ko
INSTALL drivers/media/dvb-frontends/ts2020.ko
INSTALL drivers/media/dvb-frontends/tua6100.ko
INSTALL drivers/media/dvb-frontends/ves1820.ko
INSTALL drivers/media/dvb-frontends/ves1x93.ko
INSTALL drivers/media/dvb-frontends/zd1301_demod.ko
INSTALL drivers/media/dvb-frontends/zl10036.ko
INSTALL drivers/media/dvb-frontends/zl10039.ko
INSTALL drivers/media/dvb-frontends/zl10353.ko
INSTALL drivers/media/i2c/adv7180.ko
INSTALL drivers/media/i2c/adv7604.ko
INSTALL drivers/media/i2c/ml86v7667.ko
INSTALL drivers/media/i2c/ov1063x.ko
INSTALL drivers/media/i2c/ov2659.ko
INSTALL drivers/media/i2c/ov5640.ko
INSTALL drivers/media/platform/aspeed-video.ko
INSTALL drivers/media/platform/cadence/cdns-csi2rx.ko
INSTALL drivers/media/platform/ti/cal/ti-cal.ko
INSTALL drivers/media/platform/ti/vpe/ti-csc.ko
INSTALL drivers/media/platform/ti/vpe/ti-sc.ko
INSTALL drivers/media/platform/ti/vpe/ti-vip.ko
INSTALL drivers/media/platform/ti/vpe/ti-vpdma.ko
INSTALL drivers/media/platform/ti/vpe/ti-vpe.ko
INSTALL drivers/media/spi/cxd2880-spi.ko
INSTALL drivers/media/test-drivers/vivid/vivid.ko
INSTALL drivers/media/tuners/e4000.ko
INSTALL drivers/media/tuners/fc0011.ko
INSTALL drivers/media/tuners/fc0012.ko
INSTALL drivers/media/tuners/fc0013.ko
INSTALL drivers/media/tuners/fc2580.ko
INSTALL drivers/media/tuners/it913x.ko
INSTALL drivers/media/tuners/m88rs6000t.ko
INSTALL drivers/media/tuners/max2165.ko
INSTALL drivers/media/tuners/mc44s803.ko
INSTALL drivers/media/tuners/msi001.ko
INSTALL drivers/media/tuners/mt2060.ko
INSTALL drivers/media/tuners/mt2063.ko
INSTALL drivers/media/tuners/mt20xx.ko
INSTALL drivers/media/tuners/mt2131.ko
INSTALL drivers/media/tuners/mt2266.ko
INSTALL drivers/media/tuners/mxl301rf.ko
INSTALL drivers/media/tuners/mxl5005s.ko
INSTALL drivers/media/tuners/mxl5007t.ko
INSTALL drivers/media/tuners/qm1d1b0004.ko
INSTALL drivers/media/tuners/qm1d1c0042.ko
INSTALL drivers/media/tuners/qt1010.ko
INSTALL drivers/media/tuners/r820t.ko
INSTALL drivers/media/tuners/si2157.ko
INSTALL drivers/media/tuners/tda18212.ko
INSTALL drivers/media/tuners/tda18218.ko
INSTALL drivers/media/tuners/tda18250.ko
INSTALL drivers/media/tuners/tda18271.ko
INSTALL drivers/media/tuners/tda827x.ko
INSTALL drivers/media/tuners/tda8290.ko
INSTALL drivers/media/tuners/tda9887.ko
INSTALL drivers/media/tuners/tea5761.ko
INSTALL drivers/media/tuners/tea5767.ko
INSTALL drivers/media/tuners/tua9001.ko
INSTALL drivers/media/tuners/tuner-simple.ko
INSTALL drivers/media/tuners/tuner-types.ko
INSTALL drivers/media/tuners/tuner-xc2028.ko
INSTALL drivers/media/tuners/xc4000.ko
INSTALL drivers/media/tuners/xc5000.ko
INSTALL drivers/media/usb/gspca/gspca_main.ko
INSTALL drivers/media/usb/uvc/uvcvideo.ko
INSTALL drivers/media/v4l2-core/v4l2-fwnode.ko
INSTALL drivers/mfd/ti_am335x_tscadc.ko
INSTALL drivers/misc/eeprom/at24.ko
INSTALL drivers/misc/eeprom/eeprom_93xx46.ko
INSTALL drivers/misc/pci_endpoint_test.ko
INSTALL drivers/mtd/tests/mtd_nandbiterrs.ko
INSTALL drivers/mtd/tests/mtd_nandecctest.ko
INSTALL drivers/mtd/tests/mtd_oobtest.ko
INSTALL drivers/mtd/tests/mtd_pagetest.ko
INSTALL drivers/mtd/tests/mtd_readtest.ko
INSTALL drivers/mtd/tests/mtd_speedtest.ko
INSTALL drivers/mtd/tests/mtd_stresstest.ko
INSTALL drivers/mtd/tests/mtd_subpagetest.ko
INSTALL drivers/mtd/tests/mtd_torturetest.ko
INSTALL drivers/net/can/c_can/c_can.ko
INSTALL drivers/net/can/c_can/c_can_platform.ko
INSTALL drivers/net/can/dev/can-dev.ko
INSTALL drivers/net/can/flexcan.ko
INSTALL drivers/net/can/m_can/m_can.ko
INSTALL drivers/net/can/m_can/m_can_platform.ko
INSTALL drivers/net/can/rcar/rcar_can.ko
INSTALL drivers/net/can/spi/mcp251x.ko
INSTALL drivers/net/ethernet/broadcom/tg3.ko
INSTALL drivers/net/ethernet/intel/e1000/e1000.ko
INSTALL drivers/net/ethernet/intel/e1000e/e1000e.ko
INSTALL drivers/net/ethernet/marvell/skge.ko
INSTALL drivers/net/ethernet/ti/icss_iep.ko
INSTALL drivers/net/ethernet/ti/prueth.ko
INSTALL drivers/net/ntb_netdev.ko
INSTALL drivers/net/phy/microchip.ko
INSTALL drivers/net/usb/asix.ko
INSTALL drivers/net/usb/ax88179_178a.ko
INSTALL drivers/net/usb/cdc_eem.ko
INSTALL drivers/net/usb/cdc_ether.ko
INSTALL drivers/net/usb/cdc_ncm.ko
INSTALL drivers/net/usb/cdc_subset.ko
INSTALL drivers/net/usb/lan78xx.ko
INSTALL drivers/net/usb/net1080.ko
INSTALL drivers/net/usb/pegasus.ko
INSTALL drivers/net/usb/r8152.ko
INSTALL drivers/net/usb/rtl8150.ko
INSTALL drivers/net/usb/smsc75xx.ko
INSTALL drivers/net/usb/smsc95xx.ko
INSTALL drivers/net/usb/usbnet.ko
INSTALL drivers/net/usb/zaurus.ko
INSTALL drivers/net/wireless/broadcom/b43/b43.ko
INSTALL drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
INSTALL drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
INSTALL drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko
INSTALL drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
INSTALL drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko
INSTALL drivers/net/wireless/marvell/mwifiex/mwifiex.ko
INSTALL drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko
INSTALL drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
INSTALL drivers/net/wireless/ralink/rt2x00/rt2800usb.ko
INSTALL drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
INSTALL drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko
INSTALL drivers/net/wireless/ti/wl18xx/wl18xx.ko
INSTALL drivers/net/wireless/ti/wlcore/wlcore.ko
INSTALL drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
INSTALL drivers/nfc/s3fwrn5/s3fwrn5.ko
INSTALL drivers/nfc/s3fwrn5/s3fwrn5_i2c.ko
INSTALL drivers/ntb/hw/epf/ntb_hw_epf.ko
INSTALL drivers/ntb/ntb.ko
INSTALL drivers/ntb/ntb_transport.ko
INSTALL drivers/nvme/host/nvme-core.ko
INSTALL drivers/nvme/host/nvme.ko
INSTALL drivers/phy/cadence/cdns-dphy.ko
INSTALL drivers/phy/motorola/phy-cpcap-usb.ko
INSTALL drivers/phy/phy-can-transceiver.ko
INSTALL drivers/phy/ti/phy-dm816x-usb.ko
INSTALL drivers/phy/ti/phy-omap-usb2.ko
INSTALL drivers/power/supply/bq27xxx_battery.ko
INSTALL drivers/power/supply/bq27xxx_battery_hdq.ko
INSTALL drivers/power/supply/bq27xxx_battery_i2c.ko
INSTALL drivers/power/supply/cpcap-battery.ko
INSTALL drivers/power/supply/cpcap-charger.ko
INSTALL drivers/power/supply/gpio-charger.ko
INSTALL drivers/power/supply/max17040_battery.ko
INSTALL drivers/power/supply/max17042_battery.ko
INSTALL drivers/pwm/pwm-fsl-ftm.ko
INSTALL drivers/remoteproc/omap_remoteproc.ko
INSTALL drivers/remoteproc/pru_rproc.ko
INSTALL drivers/rpmsg-kdrv/rpmsg_kdrv_switch.ko
INSTALL drivers/rpmsg/rpmsg_char.ko
INSTALL drivers/rpmsg/rpmsg_pru.ko
INSTALL drivers/rpmsg/virtio_rpmsg_bus.ko
INSTALL drivers/rtc/rtc-cpcap.ko
INSTALL drivers/rtc/rtc-ds1307.ko
INSTALL drivers/rtc/rtc-efi.ko
INSTALL drivers/rtc/rtc-omap.ko
INSTALL drivers/rtc/rtc-palmas.ko
INSTALL drivers/rtc/rtc-pcf85363.ko
INSTALL drivers/rtc/rtc-tps6586x.ko
INSTALL drivers/rtc/rtc-tps65910.ko
INSTALL drivers/soc/ti/pruss.ko
INSTALL drivers/spi/spi-bitbang.ko
INSTALL drivers/spi/spi-gpio.ko
INSTALL drivers/ssb/ssb.ko
INSTALL drivers/tty/serial/8250/8250_aspeed_vuart.ko
INSTALL drivers/tty/serial/8250/8250_pruss.ko
INSTALL drivers/tty/serial/pru_swuart.ko
INSTALL drivers/uio/uio.ko
INSTALL drivers/usb/cdns3/cdns3.ko
INSTALL drivers/usb/class/cdc-acm.ko
INSTALL drivers/usb/common/usb-common.ko
INSTALL drivers/usb/core/usbcore.ko
INSTALL drivers/usb/dwc3/dwc3-haps.ko
INSTALL drivers/usb/dwc3/dwc3-of-simple.ko
INSTALL drivers/usb/dwc3/dwc3-omap.ko
INSTALL drivers/usb/dwc3/dwc3.ko
INSTALL drivers/usb/gadget/function/u_audio.ko
INSTALL drivers/usb/gadget/function/u_ether.ko
INSTALL drivers/usb/gadget/function/u_serial.ko
INSTALL drivers/usb/gadget/function/usb_f_acm.ko
INSTALL drivers/usb/gadget/function/usb_f_ecm.ko
INSTALL drivers/usb/gadget/function/usb_f_ecm_subset.ko
INSTALL drivers/usb/gadget/function/usb_f_eem.ko
INSTALL drivers/usb/gadget/function/usb_f_fs.ko
INSTALL drivers/usb/gadget/function/usb_f_hid.ko
INSTALL drivers/usb/gadget/function/usb_f_mass_storage.ko
INSTALL drivers/usb/gadget/function/usb_f_midi.ko
INSTALL drivers/usb/gadget/function/usb_f_ncm.ko
INSTALL drivers/usb/gadget/function/usb_f_obex.ko
INSTALL drivers/usb/gadget/function/usb_f_printer.ko
INSTALL drivers/usb/gadget/function/usb_f_rndis.ko
INSTALL drivers/usb/gadget/function/usb_f_serial.ko
INSTALL drivers/usb/gadget/function/usb_f_ss_lb.ko
INSTALL drivers/usb/gadget/function/usb_f_uac1.ko
INSTALL drivers/usb/gadget/function/usb_f_uac1_legacy.ko
INSTALL drivers/usb/gadget/function/usb_f_uac2.ko
INSTALL drivers/usb/gadget/function/usb_f_uvc.ko
INSTALL drivers/usb/gadget/legacy/g_acm_ms.ko
INSTALL drivers/usb/gadget/legacy/g_audio.ko
INSTALL drivers/usb/gadget/legacy/g_cdc.ko
INSTALL drivers/usb/gadget/legacy/g_dbgp.ko
INSTALL drivers/usb/gadget/legacy/g_ether.ko
INSTALL drivers/usb/gadget/legacy/g_ffs.ko
INSTALL drivers/usb/gadget/legacy/g_hid.ko
INSTALL drivers/usb/gadget/legacy/g_mass_storage.ko
INSTALL drivers/usb/gadget/legacy/g_midi.ko
INSTALL drivers/usb/gadget/legacy/g_multi.ko
INSTALL drivers/usb/gadget/legacy/g_ncm.ko
INSTALL drivers/usb/gadget/legacy/g_printer.ko
INSTALL drivers/usb/gadget/legacy/g_serial.ko
INSTALL drivers/usb/gadget/legacy/g_webcam.ko
INSTALL drivers/usb/gadget/legacy/g_zero.ko
INSTALL drivers/usb/gadget/legacy/gadgetfs.ko
INSTALL drivers/usb/gadget/libcomposite.ko
INSTALL drivers/usb/gadget/udc/udc-core.ko
INSTALL drivers/usb/host/ehci-hcd.ko
INSTALL drivers/usb/host/ehci-omap.ko
INSTALL drivers/usb/host/ehci-pci.ko
INSTALL drivers/usb/host/ohci-hcd.ko
INSTALL drivers/usb/host/ohci-pci.ko
INSTALL drivers/usb/host/r8a66597-hcd.ko
INSTALL drivers/usb/host/xhci-hcd.ko
INSTALL drivers/usb/host/xhci-pci.ko
INSTALL drivers/usb/host/xhci-plat-hcd.ko
INSTALL drivers/usb/isp1760/isp1760.ko
INSTALL drivers/usb/misc/usb3503.ko
INSTALL drivers/usb/misc/usbtest.ko
INSTALL drivers/usb/musb/am35x.ko
INSTALL drivers/usb/musb/musb_dsps.ko
INSTALL drivers/usb/musb/musb_hdrc.ko
INSTALL drivers/usb/musb/omap2430.ko
INSTALL drivers/usb/musb/tusb6010.ko
INSTALL drivers/usb/phy/phy-am335x-control.ko
INSTALL drivers/usb/phy/phy-am335x.ko
INSTALL drivers/usb/phy/phy-generic.ko
INSTALL drivers/usb/phy/phy-gpio-vbus-usb.ko
INSTALL drivers/usb/phy/phy-isp1301.ko
INSTALL drivers/usb/roles/roles.ko
INSTALL drivers/usb/serial/cp210x.ko
INSTALL drivers/usb/serial/ftdi_sio.ko
INSTALL drivers/usb/serial/option.ko
INSTALL drivers/usb/serial/pl2303.ko
INSTALL drivers/usb/serial/usb_wwan.ko
INSTALL drivers/usb/serial/usbserial.ko
INSTALL drivers/usb/storage/uas.ko
INSTALL drivers/usb/storage/usb-storage.ko
INSTALL drivers/w1/masters/omap_hdq.ko
INSTALL drivers/w1/wire.ko
INSTALL drivers/watchdog/omap_wdt.ko
INSTALL fs/cifs/cifs.ko
INSTALL fs/efivarfs/efivarfs.ko
INSTALL lib/crc-ccitt.ko
INSTALL lib/crc-itu-t.ko
INSTALL lib/crc4.ko
INSTALL lib/crypto/libaes.ko
INSTALL lib/crypto/libarc4.ko
INSTALL lib/crypto/libdes.ko
INSTALL lib/crypto/libsha256.ko
INSTALL lib/libcrc32c.ko
INSTALL lib/math/cordic.ko
INSTALL lib/ts_bm.ko
INSTALL lib/ts_fsm.ko
INSTALL lib/ts_kmp.ko
INSTALL net/802/p8022.ko
INSTALL net/802/psnap.ko
INSTALL net/802/stp.ko
INSTALL net/8021q/8021q.ko
INSTALL net/bluetooth/bluetooth.ko
INSTALL net/bridge/bridge.ko
INSTALL net/bridge/netfilter/ebt_802_3.ko
INSTALL net/bridge/netfilter/ebt_among.ko
INSTALL net/bridge/netfilter/ebt_arp.ko
INSTALL net/bridge/netfilter/ebt_arpreply.ko
INSTALL net/bridge/netfilter/ebt_dnat.ko
INSTALL net/bridge/netfilter/ebt_ip.ko
INSTALL net/bridge/netfilter/ebt_ip6.ko
INSTALL net/bridge/netfilter/ebt_limit.ko
INSTALL net/bridge/netfilter/ebt_log.ko
INSTALL net/bridge/netfilter/ebt_mark.ko
INSTALL net/bridge/netfilter/ebt_mark_m.ko
INSTALL net/bridge/netfilter/ebt_nflog.ko
INSTALL net/bridge/netfilter/ebt_pkttype.ko
INSTALL net/bridge/netfilter/ebt_redirect.ko
INSTALL net/bridge/netfilter/ebt_snat.ko
INSTALL net/bridge/netfilter/ebt_stp.ko
INSTALL net/bridge/netfilter/ebt_vlan.ko
INSTALL net/bridge/netfilter/ebtable_broute.ko
INSTALL net/bridge/netfilter/ebtable_filter.ko
INSTALL net/bridge/netfilter/ebtable_nat.ko
INSTALL net/bridge/netfilter/ebtables.ko
INSTALL net/can/can-bcm.ko
INSTALL net/can/can-gw.ko
INSTALL net/can/can-raw.ko
INSTALL net/can/can.ko
INSTALL net/dsa/dsa_core.ko
INSTALL net/hsr/hsr.ko
INSTALL net/ipv4/ah4.ko
INSTALL net/ipv4/esp4.ko
INSTALL net/ipv4/ipcomp.ko
INSTALL net/ipv4/netfilter/arp_tables.ko
INSTALL net/ipv4/netfilter/arpt_mangle.ko
INSTALL net/ipv4/netfilter/arptable_filter.ko
INSTALL net/ipv4/netfilter/ip_tables.ko
INSTALL net/ipv4/netfilter/iptable_filter.ko
INSTALL net/ipv4/netfilter/iptable_nat.ko
INSTALL net/ipv4/netfilter/nf_defrag_ipv4.ko
INSTALL net/ipv4/xfrm4_tunnel.ko
INSTALL net/ipv6/ah6.ko
INSTALL net/ipv6/esp6.ko
INSTALL net/ipv6/ip6_tunnel.ko
INSTALL net/ipv6/ipcomp6.ko
INSTALL net/ipv6/mip6.ko
INSTALL net/ipv6/netfilter/nf_defrag_ipv6.ko
INSTALL net/ipv6/tunnel6.ko
INSTALL net/ipv6/xfrm6_tunnel.ko
INSTALL net/key/af_key.ko
INSTALL net/llc/llc.ko
INSTALL net/mac80211/mac80211.ko
INSTALL net/netfilter/nf_conntrack.ko
INSTALL net/netfilter/nf_nat.ko
INSTALL net/netfilter/x_tables.ko
INSTALL net/netfilter/xt_CLASSIFY.ko
INSTALL net/netfilter/xt_IDLETIMER.ko
INSTALL net/netfilter/xt_MASQUERADE.ko
INSTALL net/netfilter/xt_comment.ko
INSTALL net/netfilter/xt_cpu.ko
INSTALL net/netfilter/xt_iprange.ko
INSTALL net/netfilter/xt_length.ko
INSTALL net/netfilter/xt_limit.ko
INSTALL net/netfilter/xt_mac.ko
INSTALL net/netfilter/xt_mark.ko
INSTALL net/netfilter/xt_multiport.ko
INSTALL net/netfilter/xt_nat.ko
INSTALL net/netfilter/xt_pkttype.ko
INSTALL net/netfilter/xt_policy.ko
INSTALL net/netfilter/xt_sctp.ko
INSTALL net/netfilter/xt_tcpudp.ko
INSTALL net/nfc/hci/hci.ko
INSTALL net/nfc/nci/nci.ko
INSTALL net/nfc/nci/nci_spi.ko
INSTALL net/nfc/nci/nci_uart.ko
INSTALL net/nfc/nfc.ko
INSTALL net/nfc/nfc_digital.ko
INSTALL net/rpmsg/rpmsg_proto.ko
INSTALL net/sched/act_csum.ko
INSTALL net/sched/act_gact.ko
INSTALL net/sched/act_ipt.ko
INSTALL net/sched/act_mirred.ko
INSTALL net/sched/act_nat.ko
INSTALL net/sched/act_pedit.ko
INSTALL net/sched/act_police.ko
INSTALL net/sched/act_simple.ko
INSTALL net/sched/act_skbedit.ko
INSTALL net/sched/cls_basic.ko
INSTALL net/sched/cls_flow.ko
INSTALL net/sched/cls_flower.ko
INSTALL net/sched/cls_fw.ko
INSTALL net/sched/cls_route.ko
INSTALL net/sched/cls_rsvp.ko
INSTALL net/sched/cls_rsvp6.ko
INSTALL net/sched/cls_tcindex.ko
INSTALL net/sched/cls_u32.ko
INSTALL net/sched/em_cmp.ko
INSTALL net/sched/em_meta.ko
INSTALL net/sched/em_nbyte.ko
INSTALL net/sched/em_text.ko
INSTALL net/sched/em_u32.ko
INSTALL net/sched/sch_cbq.ko
INSTALL net/sched/sch_choke.ko
INSTALL net/sched/sch_codel.ko
INSTALL net/sched/sch_drr.ko
INSTALL net/sched/sch_dsmark.ko
INSTALL net/sched/sch_fq_codel.ko
INSTALL net/sched/sch_gred.ko
INSTALL net/sched/sch_hfsc.ko
INSTALL net/sched/sch_htb.ko
INSTALL net/sched/sch_ingress.ko
INSTALL net/sched/sch_mqprio.ko
INSTALL net/sched/sch_multiq.ko
INSTALL net/sched/sch_netem.ko
INSTALL net/sched/sch_prio.ko
INSTALL net/sched/sch_qfq.ko
INSTALL net/sched/sch_red.ko
INSTALL net/sched/sch_sfb.ko
INSTALL net/sched/sch_sfq.ko
INSTALL net/sched/sch_taprio.ko
INSTALL net/sched/sch_tbf.ko
INSTALL net/sched/sch_teql.ko
INSTALL net/sctp/sctp.ko
INSTALL net/sctp/sctp_diag.ko
INSTALL net/wireless/cfg80211.ko
INSTALL net/xfrm/xfrm_algo.ko
INSTALL net/xfrm/xfrm_ipcomp.ko
INSTALL net/xfrm/xfrm_user.ko
INSTALL sound/core/snd-hwdep.ko
INSTALL sound/core/snd-rawmidi.ko
INSTALL sound/soc/codecs/snd-soc-cs42l51-i2c.ko
INSTALL sound/soc/codecs/snd-soc-cs42l51.ko
INSTALL sound/soc/codecs/snd-soc-pcm3168a-i2c.ko
INSTALL sound/soc/codecs/snd-soc-pcm3168a.ko
INSTALL sound/soc/codecs/snd-soc-spdif-rx.ko
INSTALL sound/soc/codecs/snd-soc-spdif-tx.ko
INSTALL sound/soc/codecs/snd-soc-tlv320aic31xx.ko
INSTALL sound/soc/codecs/snd-soc-tlv320aic3x.ko
INSTALL sound/soc/generic/snd-soc-audio-graph-card.ko
INSTALL sound/soc/generic/snd-soc-simple-card-utils.ko
INSTALL sound/soc/generic/snd-soc-simple-card.ko
INSTALL sound/soc/ti/snd-soc-omap-hdmi.ko
INSTALL sound/usb/snd-usb-audio.ko
INSTALL sound/usb/snd-usbmidi-lib.ko
DEPMOD 5.10.100-g7a7a3af903
make[1]: 离开目录“/home/dong/ti-processor-sdk-linux-am57xx-evm-08_02_01_00/board-support/linux-5.10.100+gitAUTOINC+7a7a3af903-g7a7a3af903”

能够成功编译和安装，并没出错，但是只是编译了ti-sgx-ddk-km-1.17.4948957文件，里面生成了pvrsrvmk.ko文件，但是并没有安装到targetNFS这个文件，这是处理什么问题？