How does the register PAGE_SET[2:0] means?
Registers starting with 2 such as "0x20A, 0x224" appear in the exported. cfg file through the configuration software,
but this configuration is not included in the user manual? PAGE_ SET [2:0] only exists in three cases: "000, 11 *, 001".
Registers starting with 2 such as "0x20A, 0x224" appear in the exported. cfg file through the configuration software,
先看下PAGE_SET的定义，16bit的寄存器，bit0=1的话，即为page0 : multi-DUC1
也就是这个寄存器配置为0000 0000 0000 0001.为page0， multi-DUC1.
同样，0000 0000 0000 0010，为page1，multi-DUC2.
0000 0000 0000 0100，为page2， DIG_MISC。
bit3-15为reserved bit。
