AWR2243: How to use MATLAB to read raw data collected by radar

Yihong Luo

Part Number: AWR2243

Dear Engineers
I can’t use read_ADC_bin_TDA2_separateFiles.m (path: ’C:\Users\Administrator\Desktop\work\data\adc_data’) to read the radar collection data, please give your suggestions.
code shows as below

%  Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
%
%
%   Redistribution and use in source and binary forms, with or without
%   modification, are permitted provided that the following conditions
%   are met:
%
%     Redistributions of source code must retain the above copyright
%     notice, this list of conditions and the following disclaimer.
%
%     Redistributions in binary form must reproduce the above copyright
%     notice, this list of conditions and the following disclaimer in the
%     documentation and/or other materials provided with the
%     distribution.
%
%     Neither the name of Texas Instruments Incorporated nor the names of
%     its contributors may be used to endorse or promote products derived
%     from this software without specific prior written permission.
%
%   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
%   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
%   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
%   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
%   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
%   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
%   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
%   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
%   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
%   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
%   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
%

%% read raw adc data with MIMO 


function [radar_data_Rxchain] = read_ADC_bin_TDA2_separateFiles(fileNameCascade,frameIdx,numSamplePerChirp,numChirpPerLoop,numLoops, numRXPerDevice, numDevices)

    
  dataFolder =fileNameCascade.dataFolderName;   %fileNameCascade.dataFolderName
  fileFullPath_master = fullfile(dataFolder,fileNameCascade.master);
  fileFullPath_slave1 = fullfile(dataFolder,fileNameCascade.slave1);
  fileFullPath_slave2 = fullfile(dataFolder,fileNameCascade.slave2);
  fileFullPath_slave3 = fullfile(dataFolder,fileNameCascade.slave3);

 [radar_data_Rxchain_master] = readBinFile(fileFullPath_master, frameIdx,numSamplePerChirp,numChirpPerLoop,numLoops, numRXPerDevice, numDevices);
 [radar_data_Rxchain_slave1] = readBinFile(fileFullPath_slave1, frameIdx,numSamplePerChirp,numChirpPerLoop,numLoops, numRXPerDevice, numDevices);
 [radar_data_Rxchain_slave2] = readBinFile(fileFullPath_slave2, frameIdx,numSamplePerChirp,numChirpPerLoop,numLoops, numRXPerDevice, numDevices);
 [radar_data_Rxchain_slave3] = readBinFile(fileFullPath_slave3, frameIdx,numSamplePerChirp,numChirpPerLoop,numLoops, numRXPerDevice, numDevices);

% Arranged based on Master RxChannels, Slave1 RxChannels, slave2 RxChannels, slave3 RxChannels 
% The RX channels are re-ordered according to "TI_Cascade_RX_ID" defined in
% "module_params.m"
 radar_data_Rxchain(:,:,1:4,:) = radar_data_Rxchain_master;
 radar_data_Rxchain(:,:,5:8,:) = radar_data_Rxchain_slave1;
 radar_data_Rxchain(:,:,9:12,:) = radar_data_Rxchain_slave2;
 radar_data_Rxchain(:,:,13:16,:) = radar_data_Rxchain_slave3;
        
end


function [adcData1Complex] = readBinFile(fileFullPath, frameIdx,numSamplePerChirp,numChirpPerLoop,numLoops, numRXPerDevice, numDevices)
Expected_Num_SamplesPerFrame = numSamplePerChirp*numChirpPerLoop*numLoops*numRXPerDevice*2;
fp = fopen(fileFullPath, 'r');
fseek(fp,(frameIdx-1)*Expected_Num_SamplesPerFrame*2, 'bof');
adcData1 = fread(fp,Expected_Num_SamplesPerFrame,'uint16');
neg             = logical(bitget(adcData1, 16));
adcData1(neg)    = adcData1(neg) - 2^16;
%% 
adcData1 = adcData1(1:2:end) + sqrt(-1)*adcData1(2:2:end);
adcData1Complex = reshape(adcData1, numRXPerDevice, numSamplePerChirp, numChirpPerLoop, numLoops);
adcData1Complex = permute(adcData1Complex, [2 4 1 3]);
fclose(fp);
end

Each parameter setting is shown in the figure below

The raw data collected by radar storage location is

When I use this function as ：Rxchain = read_ADC_bin_TDA2_separateFiles('C:\Users\Administrator\Desktop\work\data\adc_data',1,256,128,8, 4, 4)，the System error is: