您好,
你们LMP91000参考设计中的Q1作用是外接电源VDD断开时,泄放RE和WE积累的电荷,以防止传感器极化?
见附图:
如果增加Q1能保证断电后,传感器不会极化,从而再次上电时,传感器初始化时间只需要几分钟?
谢谢!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,
JFET的功能在LMP91000EVM用户指南里有说明,如下截图,其功能与LMP91000内部配备的开关具有相同的功能(用于在设备处于深度睡眠模式时使RE和WE引脚短路),当气体传感器与电路板保持连接且LMP91000关闭时,气体传感器WE和RE电极之间需要零偏压。
LMP91000EVM用户指南: https://www.ti.com.cn/cn/lit/ug/snau121a/snau121a.pdf