This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Original question:
AWR1843: AWR1843参考时钟
在使用mmWave Studio采集回波数据时，参数配置阶段，假如在StaticConfig选择了TX0和TX1，但在SensorConfig仅对profile ID0进行参数配置，请问TX1还会使能吗？
TX1还是会使能的。多个chirp可以使用一个ProfileID。请看下面的文档。https://www.ti.com/lit/an/swra553a/swra553a.pdf另外，可以看一下下面的帖子里的例子。https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/779424/awr1642boost-how-can-i-config-chirp-configuration-to-enable-tx1-tx2-send-one-by-one-in-mmwave-studio-my-mmwave-studio-is-2-0-0-2
