This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
gui位置在C:\ti\mmwave_industrial_toolbox_4_10_1\labs\People_Counting\visualizer\Fall_Detection_GUI
报错显示：
点云和波形都无输出
请问烧写的是C:\ti\mmwave_industrial_toolbox_4_10_1\labs\People_Counting\3D_People_Counting\prebuilt_binaries\3D_people_count_68xx_demo.bin吗？
烧写完成后，是否有把SOP配置成function mode?
GUI里发送的是C:\ti\mmwave_industrial_toolbox_4_10_1\labs\People_Counting\3D_People_Counting\chirp_configs\AOP_6m_default.cfg文件吗？请看一下是否按照下面网站上的步骤操作的？https://dev.ti.com/tirex/explore/node?a=VLyFKFf__4.10.1&node=A__AP4ttSY7mvWfdzU56Gb8ZQ__com.ti.mmwave_industrial_toolbox__VLyFKFf__4.10.1&r=VLyFKFf__4.11.0
已经解决了，是因为我把bin文件弄混了，用的是4-10的bin文件，4-11的gui，换成4-11的bin文件就好了，谢谢回复。
不客气~非常感谢分享解决方法！
