This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
AWR1243毫米波传感器在设置Profile参数时，发现Idle Time设置过大容易有假目标出现，请问Idle Time等参数的设置，具体有什么范围要求呢，有参考文档吗？
在DFP软件包里有说明。https://www.ti.com/tool/MMWAVE-DFP请参考下面的帖子。https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1071183/awr2243-does-long-idle-time-impact-the-data-progress
这里的参数计算，采样率和斜率所计算出的idletime，是如何计算的？
我看到已经把您的问题升级到英文e2e论坛了，请关注下面帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1176676/tda3xevm-i-configured-1243-through-tda3x-the-parameters-are-workable-but-an-error-was-reported-with-the-same-parameters-everything-was-normal-on-dca1000
