This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
使用单芯片模式，使用硬件触发模式，外部主机输出sync信号到芯片的sync_in管脚。配置为硬件触发模式传感器没有触发，硬件触发模式，每次触发还需要软件调用rlSensorStart函数吗，还是硬件一次脉冲触发一次
需要先发送AWR_FRAMESTARTSTOP_CONF_SB命令，然后在sync_in上升沿会产生硬件触发，请看C:\ti\mmwave_dfp\mmwave_dfp_02_02_04_00\docs\mmWave-Radar-Interface-Control.pdf文档。
