工程师你好，
我在使用MMW Wave studio对自己开发的AWR2243板子进行测试时，发现一个问题，在使用我自己配置的雷达参数进行雷达测试时，在点击trigger Frame之后，我在output窗口中收到以下警告，并且在接收端并未收到应有的chirps数量。我的配置如下，我设置的是发送10frame,每一个frame有32个chirp循环，但在我的接收端的FPGA中只收到大概一半的chirp数量。请帮我解释一下以下log中报错的原因，并帮我寻找收到的chirp数量不对的原因。
[13:44:39] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] MSS CPU Fault error status Async event recieved(0x4, 0x0,0x18800, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[13:44:40] [RadarAPI]: Frame Ended
