TINA-TI: The problem of Importing a SPICE NetList into TINA9-TI.

Lewin Sa

Part Number: TINA-TI

Dear Engineer:

There is a problem in my Tina software when importing spice netlist into tina9-ti. It is very troublesome for you to see if you have encountered it and how to solve it.

Tina does not display successfully compile after compilation.

3 年多前

0 Amy Luo 3 年多前

TI__Guru**** 185470 points

您好，

我使用我电脑上的TINA生产了.TSM文件，您可以直接导入TINA中进行仿真，如有问题请回帖说明。

SN74LVC3G14.TSM

0 Lewin Sa 3 年多前回复 Amy Luo

Prodigy 30 points

Dear Amy：

Thank you very much for your help, but there should be a problem with my Tina. Do you have a fault manual about Tina, and I'll try to solve it.

0 Amy Luo 3 年多前回复 Lewin Sa

TI__Guru**** 185470 points

这个error是在什么情况下出现的？打开netlist就出现了吗？

0 Lewin Sa 3 年多前回复 Amy Luo

Prodigy 30 points

Dear Amy：

It is the error that appears after I click compile when importing netlist.

0 Amy Luo 3 年多前回复 Lewin Sa

TI__Guru**** 185470 points

我已经帮您生成*.TSM文件了，您直接按照下面手册的2.3章节步骤导入，然后接线、仿真就可以了：

https://www.ti.com.cn/cn/lit/an/slva527/slva527.pdf

0 Lewin Sa 3 年多前回复 Amy Luo

Prodigy 30 points

Dear Amy：

Thank you very much for your prompt. I will read the back of the manual and complete the simulation. Thank you for your help.

0 Amy Luo 3 年多前回复 Lewin Sa

TI__Guru**** 185470 points

好的，后续有疑问请回帖说明

仿真、硬件和系统设计工具

仿真、硬件和系统设计工具论坛

TINA-TI: The problem of Importing a SPICE NetList into TINA9-TI.