使用三块CC2640R2-LAUNCHXL和一块BOOSTXL-AoA,分别烧录Passive master slave程序其中如下图:
确定AOA的network建立,passive和master已经使能AOA:
但就是没有测量数据返回。
后来通过抓包发现,master节点与slave建立连接后,两者之间没有交互CTE相关的报文。
请求解决方法!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
使用三块CC2640R2-LAUNCHXL和一块BOOSTXL-AoA,分别烧录Passive master slave程序其中如下图:
确定AOA的network建立,passive和master已经使能AOA:
但就是没有测量数据返回。
后来通过抓包发现,master节点与slave建立连接后,两者之间没有交互CTE相关的报文。
请求解决方法!