This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
如標題~
我在CC2640按照"Cc2640 Adding a UART or SPI driver to a Sample Project" 這篇文章，UART可透過putty看到打印的資訊
但換到CC2640R2F卻看不到UART任何訊息
請問"Cc2640 Adding a UART or SPI driver to a Sample Project" 的做法適用於CC2640R2F嗎
謝謝
请参考下面的UART Echo自行添加：
http://dev.ti.com/tirex/explore/node?node=AImF5IZxc8r0A50Iv88Zvw__krol.2c__LATEST
