This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
各位好，请教个问题：
当电池电压从0上升到3.3当中，到达1.8V时，由于CC2541复位瞬间电流过大的原因，大概有4mA,导致电池电压在1.8V一直上不去、芯片一直复位无法正常启动，请问如何降低cc2541复位启动电流。
檢查一下你啟動時io腳位有沒有消耗過大的電流
