If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你有讀一下例程的readme嗎？
This examples consists of a single task and the exported SmartRF Studio radio settings.
When the task is executed it:
1.Configures the radio for Proprietary mode
2.Gets access to the radio via the RF drivers RF_open
3.Sets up the radio using CMD_PROP_RADIO_DIV_SETUP command
4.Set the output power to 14 dBm (requires that CCFG_FORCE_VDDR_HH = 1 in ccfg.c), this requirement holds for CC13x2P boards when using the default PA
5.Sets the frequency using CMD_FS command
6.Create packet (with increasing sequence number and random content)
7.Transmit packet using CMD_PROP_TX command with blocking RF driver call
8.Toggle Board_PIN_LED1 to indicate packet transmitted
9.Power down the radio using the yield function
10.Set the main core to sleep for the duration of PACKET_INTERVAL ms
11.Transmit packets forever by repeating step 6-10
