If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
To see the serial output from the kit it is necessary to use a terminal emulator. Start this up now, when you've confirmed that the debugger connection to the device works. There are several options:
PuTTY
Tera Term
RealTerm
Windows PowerShell
Or even just going to the command prompt and typing for example type COM4:.
Type help mode to learn how to set the port parameters.
Start your terminal program
Choose 115200 baud as the speed, 8 bit data, 1 stop bit, no parity, no flow control.
Open the serial port
