If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
这是我参数：
// Fast advertising interval in 625us units.
#define DEFAULT_FAST_ADV_INTERVAL 32
// Duration of fast advertising duration in ms.
#define DEFAULT_FAST_ADV_DURATION 30000
// Slow advertising interval in 625us units.
#define DEFAULT_SLOW_ADV_INTERVAL 1600
// Slow advertising duration in ms (set to 0 for continuous advertising).
#define DEFAULT_SLOW_ADV_DURATION 0
// How often to perform heart rate periodic event.
#define DEFAULT_HEARTRATE_PERIOD 20//8//8//MS
// Whether to enable automatic parameter update request when a connection is
// formed.
#define DEFAULT_ENABLE_UPDATE_REQUEST GAPROLE_LINK_PARAM_UPDATE_WAIT_BOTH_PARAMS
// Minimum connection interval (units of 1.25ms) if automatic parameter update
// request is enabled.
#define DEFAULT_DESIRED_MIN_CONN_INTERVAL 200
// Maximum connection interval (units of 1.25ms) if automatic parameter update
// request is enabled.
#define DEFAULT_DESIRED_MAX_CONN_INTERVAL 1600
// Slave latency to use if automatic parameter update request is enabled.
#define DEFAULT_DESIRED_SLAVE_LATENCY 1
// Supervision timeout value (units of 10ms) if automatic parameter update
// request is enabled.
#define DEFAULT_DESIRED_CONN_TIMEOUT 1000
// Battery level is critical when it is less than this %
#define DEFAULT_BATT_CRITICAL_LEVEL 6
Error[Li005]: no definition for "osal_memcpy" [referenced from C:\ti\simplelink\ble_sdk_2_02_04_06\examples\cc2650em\simple_peripheral\iar\app\FlashROM\Obj\simple_gatt_profile.o]
