cc2642 syscfg uart 波特率设置

波特率需要在程序中修改
UART_Params_init(&uartParams);
uartParams.writeDataMode = UART_DATA_BINARY;
uartParams.readDataMode = UART_DATA_BINARY;
uartParams.readReturnMode = UART_RETURN_FULL;
uartParams.baudRate = 115200;

写了这一段没有效果
void Uart_Init(uint16_t baudrate)
{
// One-time initialization of UART driver
UART_init();
// Initialize UART parameters
UART_Params params;
UART_Params_init(&params);
params.baudRate = baudrate;
params.readMode = UART_MODE_BLOCKING;
params.writeMode = UART_MODE_BLOCKING;
params.readTimeout = UART_WAIT_FOREVER;
params.writeTimeout = UART_WAIT_FOREVER;


uart = UART_open(CONFIG_DISPLAY_UART, NULL);

/* Adding basic printf over uart with TI-RTOS
* Reference : processors.wiki.ti.com/.../CC26xx_Adding_basic_printf_over_uart_with_TI-RTOS */
UartPrintf_init(uart);

}

好的，感谢反馈