| 正常从机 | 有问题的从机 | 有问题的从机从新烧程序后成功 |
|
SC_EVT_SCAN_DISABLED Initiate service discovery Discovering... SC_EVT_ADV_REPORT SC_EVT_ADV_REPORT SC_EVT_ADV_REPORT groupMember: 0x010203040501 SC_EVT_ADV_REPORT SC_EVT_SCAN_DISABLED AutoConnect: Number of members in the group 1 Initiate service discovery HCI_GAP_EVENT_EVENT:3e numConn:1 SC_EVT_PAIR_STATE Pairing started Initiate service discovery BLE_DISC_STATE_MTU HCI_GAP_EVENT_EVENT:3e Service found, store handles If procedure complete BLE_DISC_STATE_CHAR SBC_NOTI_ENABLE_EVT Notification success:0 |
SC_EVT_SCAN_DISABLED Initiate service discovery Discovering... SC_EVT_ADV_REPORT groupMember: 0x010203040507 SC_EVT_ADV_REPORT SC_EVT_SCAN_DISABLED AutoConnect: Number of members in the group 1 Initiate service discovery HCI_GAP_EVENT_EVENT:3e numConn:1 Initiate service discovery HCI_GAP_EVENT_EVENT:f SC_EVT_PAIR_STATE HCI_GAP_EVENT_EVENT:3e GAP_LINK_TERMINATED_EVENT 0x010203040507 is disconnectedNum Conns: 0 HCI_GAP_EVENT_EVENT:3e numConn:1 Initiate service discovery HCI_GAP_EVENT_EVENT:f
|
SC_EVT_SCAN_DISABLED |
表格是主机连接从机时，打印连接的过程。区别在于在启动发现服务后，连接失败的不能得到特征值的char，调试输出HCI_GAP_EVENT_EVENT:f，f是HCI_COMMAND_STATUS_EVENT_CODE（HCI Commands Events）。cmdopcode代码是0x406（HCI_DISCONNECT），
