This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
现在CC2541的功耗一直很高，广播时候达到11ma，我设置休眠电流也有8ma，所以一直怀疑没有进入PM3
有没有方法在程序启动时候直接强制进入PM3模式，我在main函数启动时加入下面这两条代码
SLEEPCMD |= 0X83; PCON = 1;
上面这样写可以进入PM3吗？
SLEEPCMD =0x87;
或者SLEEPCMD =0x07;
