CC2500: 其他无线技术论坛

Z.Cheng C

Part Number: CC2500

Hello, I recently wanted to use the CC2500 for wireless communication, but I found that when two CC2500 devices operate simultaneously on the same channel and frequency band, it causes data distortion errors and leads to communication failure. How should I resolve this issue

1 个月前

0 Daniel 1 个月前

TI__Mastermind 38495 points

您好

已经收到了您的案例，调查需要些时间，感谢您的耐心等待

0 Daniel 1 个月前

TI__Mastermind 38495 points

您好

Can you explain the test setup a bit more?

Is one CC2500 in TX mode and the other in RX mode?

0 Z.Cheng C 1 个月前

Prodigy 50 points

HI,Daniel,the CC2500 acts as both a RX and a TX. When data needs to be sent, it switches to TX mode. After sending is completed, it switches back to RX mode to wait for the other CC2500 device to receive the data and send a response.

0 Daniel 1 个月前回复 Z.Cheng C

TI__Mastermind 38495 points

您好

Is it possible to test the sensitivity of the device in the hardware?
See section 7 of this for details: https://www.ti.com/lit/pdf/swra370