This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
CC1310 CCS环境下 例程的GPIO_init();UART_init(); 等函数看不到定义，只看到头文件声明
为什么你们自家的IDE要这样设计？
初始化的参数在UART_init()后面
UART_init(); * * // Initialize UART parameters * UART_Params params; * UART_Params_init(¶ms); * params.baudRate = 9600; * params.readMode = UART_MODE_BLOCKING; * params.writeMode = UART_MODE_BLOCKING; * params.readTimeout = UART_WAIT_FOREVER; * params.writeTimeout = UART_WAIT_FOREVER;
可以看下CC1310_LAUNCHXL.c中的GPIO部分
看下GPIO.h中的示例
