工程师你好,
我想请问一下,如果我不想用自带的那条cable来给launchpad供电,我需要连接哪些pin脚来供电呢,因为我发现板子上有挺多表明了5v,3.3v,GND标志的引脚。
或者,我在technical manual文件的哪一章可以找到相关的内容呢?
谢谢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
工程师你好,
我想请问一下,如果我不想用自带的那条cable来给launchpad供电,我需要连接哪些pin脚来供电呢,因为我发现板子上有挺多表明了5v,3.3v,GND标志的引脚。
或者,我在technical manual文件的哪一章可以找到相关的内容呢?
谢谢
你最好查阅一下原理图和使用手册。按照Net查找一下,这样更精确。有一些跳线帽需要调整一下。
LAUNCHXL-CC1310 Design Files (Rev. B)
CC1310 LaunchPad Getting Started Guide (Rev. B)
BR. Albin
你看一下原理图就清楚了。板上有个电源,会把5V变到3.3.V。
芯片是3.3V工作的。
BR. Albin