This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
CC2530芯片外部晶振引脚电压，我用万用表测量后的电压为：连接32.768KHz晶振的两个引脚的电压均为3.3V，32MHz晶振的两个引脚的电压基本上均为0V。请问，这是正常的吗？
CC2530芯片32M晶体的波形上，波峰只有900mV左右，你用万用表测到0V也算正常吧。我这个是在芯片正常工作的情况下测的。
这不正常，请确认IC是否损坏。
