This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

请教一下,3200,上电后低概率复位不成功,可能是什么问题。

Other Parts Discussed in Thread: CC3200

3200 上电复位,1/20的概率,应用程序没有运行,可能是什么问题。 保持供电,手动复位,也有类似的情况,请帮忙解答一下。

  • RC复位的时间是否符合CC3200的上电时序?官方的CC3200Launchpad上的参数为10mS时间,确认硬件的RC参数,同时确认CC3200的Datasheet中4.11.2 Reset Timing部分

    Hold the RESET pin low while the supplies are ramping up. TI recommends using a simple RC circuit (100K ||0.1 µF, RC = 10 ms).