If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
附上：My suggestion was to keep only the CC3200MOD on your board. then have 5 test points + GND on your board. You could use another Launchpad with the 4 JTAG lines + GND conected to some wire with a connector. Then you can use the Launchpad itself to connect to your target board. Does this make sense..
Or else, there is XDS100 emulator from TI which also works. You could also buy a standard FTDI board which you can program to work as an emulator.
