If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
If you move the BLE stack, you have to change the locations in both the stack and your application. That also means that you need to re-flash the stack to make sure it's properly located in memory and then re-flash your application.
If you use SYSBIOS in ROM, there is RAM allocated for those functions (you should see this in your cmd file of the application and there are defines in your project). So if you move ICALL_RAM0_ADDR to the end of the RAM address, make sure you don't overlap with the SYSBIOS RAM.
The RAM needs to be aligned with a 32-bit word.
The Flash needs to be aligned with a page (4096bytes or multiples of 0x1000)
You need to leave the last page for CCFG
You need to leave 1 or 2 pages for SNV (depending on your SNV configuration)
