NLME_PermitJoiningRequest错误

试试能否找到这个函数原型。
不知道你是不是使用这个函数时候出问题了，参考这个贴里面回复的参考贴
e2echina.ti.com/.../89168

以下是函数原型：
NLME_PermitJoiningRequest()

This function defines how the next higher layer of a coordinator or router device may permit devices to join its network for a fixed period.

Prototype
ZStatus_t NLME_PermitJoiningRequest( byte PermitDuration );

Parameter Details
PermitDuration - The length of time during which the a device (coordinator or router) will be allowing associations. The values 0x00 and 0xff indicate that permission disabled or enabled, respectively without a time limit. Values 0x01 – 0xFE are the number of seconds to allow joining.

Return
ZStatus_t –status values defined in ZComDef.h.

请问能否给出具体的调用代码？在ZComDef.h中并没有0x84 的错误代码