如何重启cc2530射频，AF_DataRequest发送前如何发起路由发现

1. 沒有單獨重启射频的API，只有reset chip的
2. 路由不存在的話Z-Stack 會主動發出route request，無須在AF_DataRequest的options选项設定

2.但是我在AF_DATA_CONFIRM_CMD消息里做如下处理，重新发起了ZDP_MgmtNwkDiscReq()
case AF_DATA_CONFIRM_CMD:
// This message is received as a confirmation of a data packet sent.
// The status is of ZStatus_t type [defined in NLMEDE.h]
// The message fields are defined in AF.h
afDataConfirm = (afDataConfirm_t *)MSGpkt;
// sentEP = afDataConfirm->endpoint;
SentStatus = afDataConfirm->hdr.status;
if(SentStatus != ZSuccess )
{

if(countt < 10)
{
if(SentStatus == ZNwkNoRoute)//没有路由
{
zAddrType_t SendDataAddr;
SendDataAddr.addrMode = (afAddrMode_t)Addr16Bit;
SendDataAddr.addr.shortAddr = addrs;

ZDP_MgmtNwkDiscReq(&SendDataAddr,zgDefaultChannelList,10,0,0);
}
else if(SentStatus == ZMacNoACK)
{
SystemResetSoft();// mac出错，只能重启解决
}
else if( SentStatus == ZApsNoAck )
{
SystemResetSoft();
}
else
{
osal_start_timerEx( zclSampleLight_TaskID,SAMPLEAPP_SEND_WRITEDATA_EVT,50 );
}

memset(&TEST[0],0xAA,3);
TEST[3]=SentStatus;
HalUARTWrite ( 0, &TEST[0] ,4);

}

//SystemResetSoft();
}
else
{
memset(&TEST[0],0xBB,4);
HalUARTWrite ( 0, &TEST[0] ,4);
}
break;

(2)的问题是经过一段时间后第一次控制，控制不到，我发起了ZDP_MgmtNwkDiscReq之后就能发送了。并且路由设置的route request为120S。我也很奇怪到底什么问题引起的

您可以通过APSC_MAX_FRAME_RETRIES设置重发次数,在您发送失败后会自动进行重新发送
The number of times that the message is retried (if APS ACK message isn’t received) and the timeout between retries are configuration items in
f8wConfig.cfg. APSC_MAX_FRAME_RETRIES is the number of retries the APS layer will send the message if it doesn’t receive an APS ACK before giving up. APSC_ACK_WAIT_DURATION_POLLED is the time between retries.