This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在main初始化哪里？还是修改配置的zgDefaultStartingScanDuration
我想让终端上电就不扫描网络，等待按键扫描
还有就是 为何离网发送了datareques而不是beacon request？我配置了zgDefaultStartingScanDuration默认值为为15 按键再赋值并且启动网络搜索： zgDefaultStartingScanDuration = 5; if(FALSE == ZDApp_StartJoiningCycle()) { ZDApp_StartJoiningCycle(); } ZDApp_ChangeState( DEV_INIT ); ZDOInitDevice( 0 ); 终端编译： SECURE=1 TC_LINKKEY_JOIN NV_INIT NV_RESTORE POWER_SAVING NWK_AUTO_POLL xHOLD_AUTO_START xZTOOL_P1 xMT_TASK xMT_APP_FUNC xMT_SYS_FUNC xMT_ZDO_FUNC xLCD_SUPPORTED=DEBUG MULTICAST_ENABLED=FALSE ZCL_READ ZCL_WRITE ZCL_REPORT xZCL_EZMODE ZCL_BASIC ZCL_IDENTIFY ZCL_ON_OFF ZCL_SCENES ZCL_GROUPS xZCL_LEVEL_CTRL ZCL_DIAGNOSTIC FEATURE_SYSTEM_STATS WDT_IN_PM1 KEY THREE_KEY xMANAGED_SCAN xHAL_LCD xHAL_LED 问题：在协调器断电后为何还能发送data request 协调器上电后也能加入网络
详见抓包短地址为B40F
B40F.zip
协调器断电后为何还能发送data request
你指的是抓包檔的那一段？
