CC2530基于GenericApp(Z-Stack-Mesh-1.0.0),两块CC2530模块,一个烧写为协调器,
一个烧写为终端设备,两个设备上电后,后按了一下按键,
两边都可以进入ZDP_EndDeviceBindReq函数
但是通过打断点发现两个设备并没有相互发送hello world数据
可能是什么原因?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
CC2530基于GenericApp(Z-Stack-Mesh-1.0.0),两块CC2530模块,一个烧写为协调器,
一个烧写为终端设备,两个设备上电后,后按了一下按键,
两边都可以进入ZDP_EndDeviceBindReq函数
但是通过打断点发现两个设备并没有相互发送hello world数据
可能是什么原因?