ZigBee协议栈的一些疑问

在hal_key.c

你好，在协调器init的時候使用 NLME_PermitJoiningRequest(0)就可以將协调器设置为不允许加入,

初始化函数如下，我需要在什么位置加入该函数？

另外HOLD_AUTO_START需要怎么处理？他和NLME_PermitJoiningRequest有什么不同？

void zclSampleDoorLockController_Init( byte task_id )
{
  zclSampleDoorLockController_TaskID = task_id;

  // Set destination address to indirect  Addr16Bit
  zclSampleDoorLockController_DstAddr.addrMode = (afAddrMode_t)AddrNotPresent;
  zclSampleDoorLockController_DstAddr.endPoint = 0;
  zclSampleDoorLockController_DstAddr.addr.shortAddr = 0;

  // This app is part of the Home Automation Profile
  zclHA_Init( &zclSampleDoorLockController_SimpleDesc );

  // Register the ZCL General Cluster Library callback functions
  zclGeneral_RegisterCmdCallbacks( SAMPLEDOORLOCKCONTROLLER_ENDPOINT, &zclSampleDoorLockController_CmdCallbacks );

  // Register the application's attribute list
  zcl_registerAttrList( SAMPLEDOORLOCKCONTROLLER_ENDPOINT, SAMPLEDOORLOCKCONTROLLER_MAX_ATTRIBUTES, zclSampleDoorLockController_Attrs );

  // Register the Application to receive the unprocessed Foundation command/response messages
  zcl_registerForMsg( zclSampleDoorLockController_TaskID );

  // Register for all key events - This app will handle all key events
  RegisterForKeys( zclSampleDoorLockController_TaskID );

  //Register the ZCL DoorLock Cluster Library callback function
  zclClosures_RegisterDoorLockCmdCallbacks( SAMPLEDOORLOCKCONTROLLER_ENDPOINT, &zclSampleDoorLockController_DoorLockCmdCallbacks );

  // Register for a test endpoint
  afRegister( &sampleDoorLockController_TestEp );

#ifdef ZCL_EZMODE
  // Register EZ-Mode
  zcl_RegisterEZMode( &zclSampleDoorLockController_RegisterEZModeData );

  // Register with the ZDO to receive Match Descriptor Responses
  ZDO_RegisterForZDOMsg(task_id, Match_Desc_rsp);
#endif

  ZDO_RegisterForZDOMsg( zclSampleDoorLockController_TaskID, End_Device_Bind_rsp );
  ZDO_RegisterForZDOMsg( zclSampleDoorLockController_TaskID, Match_Desc_rsp );
  
  // register for end device annce and simple descriptor responses
  ZDO_RegisterForZDOMsg( zclSampleDoorLockController_TaskID, Device_annce );
  
  // initialize NVM for storing PIN information
  /*if ( SUCCESS == osal_nv_item_init( ZCD_NV_APS_DOORLOCK_PIN, 5, aiDoorLockPIN ) )
    // use NVM PIN number in APP
    osal_nv_read( ZCD_NV_APS_DOORLOCK_PIN, 0, 5, aiDoorLockPIN );*/

/*#ifdef LCD_SUPPORTED
  // display the device name
  HalLcdWriteString( (char *)sDeviceName, HAL_LCD_LINE_3 );
#endif*/
  //串口初始化
  MT_UartInit();//串口
  MT_UartRegisterTaskID(task_id);//登记任务号
  //协调器收到启动EZMODE，绑定后无需进入EZMODE也能控制
}

1.版本是HA的3.0版本

2.再请问一个问题，没按一下按键，发送一下按键的状态，代码如下，但是按了按键之后计数不变，也进入函数里了，

把按键状态上报的部分去了，计数累加正常，请问是什么原因？

    if(keys == KEY_DOWN)
    {
     Sw2Count++;
     reportCmd.numAttr = 1;
     reportCmd.attrList[0].attrID = ATTRID_BASIC_DEVICE_ENABLED;
     reportCmd.attrList[0].dataType = ZCL_DATATYPE_UINT8;
     //单播发送到协调器
     zclSampleDoorLock_DstAddr.addrMode = (afAddrMode_t)Addr16Bit;
     zclSampleDoorLock_DstAddr.endPoint = DLSAPP_EP;//目的端点号
     zclSampleDoorLock_DstAddr.addr.shortAddr = 0x00;//Coordinator 
     if((Sw2Count%2) == 1)
      {
        Board_Led_control(board_led_type_LED4, board_led_state_ON);
        zdlLockState = 0x21;/
        reportCmd.attrList[0].attrData = &zdlLockState;
        zcl_SendReportCmd(DLSAPP_EP, &zclSampleDoorLock_DstAddr,ZCL_CLUSTER_ID_CLOSURES_DOOR_LOCK,&reportCmd,ZCL_FRAME_CLIENT_SERVER_DIR,TRUE,zclSampleDoorLockSeqNum++);
      }
      else
      {
        Board_Led_control(board_led_type_LED4, board_led_state_OFF);
        zdlLockState = 0x20;
        reportCmd.attrList[0].attrData = &zdlLockState;
        zcl_SendReportCmd(DLSAPP_EP, &zclSampleDoorLock_DstAddr,ZCL_CLUSTER_ID_CLOSURES_DOOR_LOCK,&reportCmd,ZCL_FRAME_CLIENT_SERVER_DIR,TRUE,zclSampleDoorLockSeqNum++);
      }
    }  

你好:

请问TIMAC1.5.2是怎么控制节点搜索网络的频率的？找了一下并没有找到

提前谢谢你的 帮助了