DLP4500 SDK Problem

请问你如何联系?

我咨询一下Design House是否有适合贵公司的.

目前將此模組運用於3D物件的掃瞄,

取得雲點座標後再做後續的3D處理,

開發IDE環境為 Windows Visual studio 2013,

我使用CMAKE將網頁提供之SDK Sourse建置為VS2013 Lib,

產生錯誤如圖

想請問貴公司有沒有直接build建置完成,

適合vs2013環境下開發使用之sdk,

謝謝

TI 的SDK和USER guide在:

http://www.ti.com/tool/dlp-alc-lightcrafter-sdk

我们的使用环境是(QT):

The following pieces of software are required to build the DLP ALC SDK:
1. CMake v3.1: https://cmake.org/download/
2. Qt v5.3.2 (for the MinGW 4.8 compiler): http://download.qt.io/archive/qt/5.3/5.3.2/
3. OpenCV v2.4.10: https://sourceforge.net/projects/opencvlibrary/files/opencv-win/2.4.10/
4. Doxygen v1.8.11: http://www.stack.nl/~dimitri/doxygen/download.html
5. TI DLP SDK v2.0: http://www.ti.com/tool/DLP-ALC-LIGHTCRAFTER-SDK
Be sure to download the proper file types for your system. These downloads are large and, depending on
your web connection, can take a long time. Throughout this guide we will be using a 32-bit Windows 7
system. The file names and approximate sizes in this case are:
• cmake-3.5.0-win32-x86.msi (15 Mb)
• qt-opensource-windows-x86-mingw482_opengl-5.3.2.exe (737 Mb)
• opencv-2.1.10.exe (367.3 Mb)
• doxygen-1.8.11-setup.exe (24 Mb)
• DLPSDK-2.0-windows-installer.zip (7kB)

你好,

我依照網頁的步驟使用QT建置好,

libglfw3.a 與 libDLP_SDK.a 這兩個檔案

要怎麼在VISUAL STUDIO環境下使用這Library呢?

这个平台的现在没有.我们在评估看有否计划.

请参考embedded Linux:

http://www.ti.com/cn/lit/pdf/tiduc48