This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] RTOS/CC2640R2F:热复位后、如何判断上电?

Guru**** 2595805 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/611667/rtos-cc2640r2f-after-hot-reset-how-to-tell-from-power-on

器件型号:CC2640R2F

工具/软件:TI-RTOS

正在使用 CC2640模块。 我希望能够检查程序是从上电还是从复位启动。 我发现所有变量在复位后都被复位为0、即使电源始终开启。 我的问题是:如何读取启动状态是从上电还是从复位状态?

提前感谢。 此致、Young