请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:CC2640R2F 工具/软件:TI-RTOS
正在使用 CC2640模块。 我希望能够检查程序是从上电还是从复位启动。 我发现所有变量在复位后都被复位为0、即使电源始终开启。 我的问题是:如何读取启动状态是从上电还是从复位状态?
提前感谢。 此致、Young
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
工具/软件:TI-RTOS
提前感谢。 此致、Young