[参考译文] TMS320F28377S：编译错误类型#1965无法打开源文件"math.h"

我尝试过这种方法但没有结果。 我注意到、在到达错误之前、这些包含路径未包含在构建日志中。 (向右滚动以查看包含路径)。

**** Build of configuration Debug for project motor-sw-proto-inverter-intg ****

"C:\\ti\\ccsv7\\utils\\bin\\gmake" -k -j 8 all -O 
 
'Building file: "../main.c"'
'Invoking: C2000 Compiler'
"C:/ti/ccsv7/tools/compiler/ti-cgt-c2000_16.9.6.LTS/bin/cl2000" -v28 -ml -mt --cla_support=cla1 --float_support=fpu32 --tmu_support=tmu0 --vcu_support=vcu2 --opt_for_speed=5 --fp_mode=relaxed --include_path="C:/Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg" --include_path="C:/Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/bsp/dev/incl" --include_path="C:/Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/src" --include_path="C:/Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/bsp/peripheral/incl" --advice:performance=all -g --diag_warning=225 --diag_wrap=off --display_error_number --preproc_with_compile --preproc_dependency="main.d_raw"  "../main.c"

>> Compilation failure
subdir_rules.mk:9: recipe for target 'main.obj' failed
"C:/Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/src/globals.h", line 15: fatal error #1965: cannot open source file "math.h"
1 catastrophic error detected in the compilation of "../main.c".
Compilation terminated.
gmake: *** [main.obj] Error 1
gmake: Target 'all' not remade because of errors.

**** Build Finished ****

从我的 make 文件中、

-include sources.mk
-include subdir_vars.mk
-include bsp/dev/cmd/subdir_vars.mk
-include bsp/dev/src/subdir_vars.mk
-include bsp/peripheral/src/subdir_vars.mk
-include src/subdir_vars.mk
-include subdir_rules.mk
-include bsp/dev/cmd/subdir_rules.mk
-include bsp/dev/src/subdir_rules.mk
-include bsp/peripheral/src/subdir_rules.mk
-include src/subdir_rules.mk
-include objects.mk

这些工程属性编译应包含在何处？ 我在这些.mk 文件中看不到它们

您是否使用 makefile 来构建或 IDE？ 我通常要构建 CCS/IDE。

查看该命令、似乎没有新添加的路径作为 include 路径。 我刚才从您的输出复制了。

"c：/ti/ccsv7/tools/compiler/ti-cgt-C2000-16.9.sps/bin/cl2000"-v28 -ml -cla_support=cla1 --float_support=fpu32 --tmu_support=tmu_support=vcu_support=vcu-mT --opt_for_support=cla1 --float_support=fpulat_support=fcpu_support=fu_support=fu_board-board-probulation_reus_board-board-board-board_support=fpf-intrat_support=g_support=f_support=fpulation_reus_board-board-board-board-board_support=f_board_board_support=f_supboard-board-board_board_board-inflat_board_superview-board_supboard_superview-cn_board_supmag_overview-cn_overview-cn_overview /Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/bsp/peripheral/incl /Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/src /Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg/bsp/dev/incl /Users/atp/Desktop/prototype-software/motor-sw-proto-inverter-intg

我将使用 CCS 进行构建。