This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CCS:在 C2000 MCU 中对 CLB 进行编程

Guru**** 2039090 points
Other Parts Discussed in Thread: C2000WARE
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/852879/ccs-program-clb-in-c2000-mcu

主题中讨论的其他器件:C2000WARE

工具/软件:Code Composer Studio

你(们)好

我在新一代 C2000微控制器中稍微了解了 CLB。

您能解释一下我们如何对 CLB 器件进行编程吗? 它是通过 VHDL 语言还是通过 C 语言的特殊 SDK 实现的?

此致

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您是否见 过 https://training.ti.com/clbtooloverview ?

    它具有指向信息的链接,如 《CLB 工具用户指南》。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你(们)好

    我看到了链接、非常有趣。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    Dariush

    请查看 CLB 工具用户指南、下载并安装 c2000ware。 然后在我们的 LaunchPad 或控制卡上运行 CLB 示例。

    NIMA