This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
大家好!
我已经围绕 TMS320F28035制作了一个定制板。
我正面临一个不寻常的问题。
如果没有仿真器、我的闪存代码无法正常工作、但在连接仿真器时工作正常。
闪存擦除、验证和程序也会显示在屏幕上。
我正在使用 XDS100V2。
请提供同样的建议。
谢谢。
Himanshu。
请检查引导模式引脚的状态是否设置为 GetMode、默认情况下、GetMode 应在加电时选择 Boot to flash
http://www.ti.com/document-viewer/TMS320F28035/datasheet/boot-rom-litsprs230-0453#litSPRS230-0453
最棒的
Matthew
谢谢!
我已下拉 GPIO34和 GPIO37。
都需要上拉。
上拉后、工作正常。
谢谢。。。
Himanshu。