您好,
在我的设计中,我使用的是 SN65DSI84,并已验证通道 A 上连接的显示器是否工作正常。 我连接了通道 B 上的其他显示屏,但这一个显示屏没有图像(我也验证了信号,它们看起来太弱)。
要在两个通道上显示,我已设置了“调整大小”0x18“清除位4”。 我是否需要执行其他设置? 谢谢。
巴西,
马雷克
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
马雷克
您可以分享面板规格吗?
您是否使用 DSI 调谐器生成了 DSI84寄存器编程值? 有关如何使用 DSI 调谐器软件 的信息,请访问 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/918890/faq-sn65dsi84-how-to-configure-the-sn65dsi84-and-sn65dsi85-for-single-channel-dsi-to-dual-channel-lvds。
e2e.ti.com/.../8688.DSI-Tuner-2.1.zip
谢谢
大卫