尊敬的
当使用有源晶体振荡器输出3.3V 正弦波时、我们希望将3.3V 正弦波更改为5V 正弦波。
是否可以将 SN74AHCT1G04等反相缓冲器/驱动器与5V 电源、3.3V 正弦波输入一起使用、以在输出 Y 中生成反相5V 正弦波?
使用5V 电源供电时、输出波形为5V? 或3.3V?
谢谢!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
尊敬的
当使用有源晶体振荡器输出3.3V 正弦波时、我们希望将3.3V 正弦波更改为5V 正弦波。
是否可以将 SN74AHCT1G04等反相缓冲器/驱动器与5V 电源、3.3V 正弦波输入一起使用、以在输出 Y 中生成反相5V 正弦波?
使用5V 电源供电时、输出波形为5V? 或3.3V?
谢谢!