请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:SN74AXC8T245 、是否可以使用上拉电阻或下拉电阻来添加芯片两端的 I/O 端口?(如下图所示);需要为某些 IO 端口提供高/低电平电压初始状态。
2、您能向我展示 SN74AXC8T245的内部结构吗?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
、是否可以使用上拉电阻或下拉电阻来添加芯片两端的 I/O 端口?(如下图所示);需要为某些 IO 端口提供高/低电平电压初始状态。
2、您能向我展示 SN74AXC8T245的内部结构吗?
您好、Hanbo、
除了克莱门的反馈,还请看 https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1101096/faq-why-is-there-a-voltage-offset-at-the-input-of-the-sn74axcxtxxx-device ,因为该设备已经有大约280千欧的弱内部下拉电阻。 因此、可能不需要额外的下拉电阻。
还需注意的是、数据表正在修订、以包含下拉信息、谢谢。
此致、
迈克尔.