This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ25792:BQ25792:BATP 引脚输入电阻

Guru**** 2380860 points
Other Parts Discussed in Thread: BQ25792
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1503554/bq25792-bq25792-batp-pin-input-resistance

器件型号:BQ25792

工具/软件:

尊敬的 TI E2E:

BQ25792芯片的数据表提到了

"用于电池电压检测的正极输入–连接到电池包的正极端子。 在此引脚和电池正极端子之间放置100Ω 串联电阻。'

如果我在这条线路上使用10k Ω 电阻器而不是100 Ω 电阻器、会发生什么情况? BQ 充电器是否无法像监测电池包电压那样密切地监测电池包电压并导致充电问题?