This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LM25148-Q1:轻负载时出现压降问题

Guru**** 2462330 points
Other Parts Discussed in Thread: LM25148-Q1

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1519030/lm25148-q1-trouble-with-voltage-dropout-at-light-loads

器件型号:LM25148-Q1

工具/软件:

我使用 Powerbench Designer 设计了一个采用 LM25148-Q1的降压转换器(随附了原理图)。 设计人员认为、额定电流为15A、但即使在5A 下、压降也是如此。 以下是黄色的示波器输出 Vout 和蓝色的 SW。 请帮助!