This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1540770/bq25616-does-leaving-the-d-d--pins-as-nc-default-to-the-input-current-limit-set-by-ilim
工具/软件：
我正在将 BQ25616 实施到我的设计中、并希望 D+和 D-引脚保持未连接状态。 如果我这样做、连接到 ILIM 的电阻器是否会设置电流限制、或者由于未检测到 USB 信号、它是否会默认为另一个值？
您好：
悬空 D+/D–会将适配器识别为未知、ILIM 引脚将设置输入电流限值。
此致、
Mike Emanuel
