This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS546E25:确认数据表中的寄存器说明

Guru**** 2782575 points

Other Parts Discussed in Thread: TPS546E25

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1606771/tps546e25-confirmation-of-the-register-description-in-the-datasheet

器件型号: TPS546E25

尊敬的 TI 支持团队:

TPS546E25 Rev. A 数据表中的表示法似乎存在错误 请您确认一下。

我认为地址 0xD6h 处的位 3:2 和位 1:0 的内容已交换。 即使在检查多个器件后、实际值也与根据数据表计算出的值不匹配、在 Fusion Digital Power Designer 中、位 3:2 显示为 STACK_NUMBER、位 1:0 显示为 STACK_POSITION。

130707.png

此致、

Ayumu

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    我同意、感谢您查找和报告。  

     图 7-77 映射正确、表不正确、并且交换了 STACK_NUMBER 和 STACK_POSITION。  

    我报告了差异

    再次感谢、