This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LM317:LM317 并行配置支持

Guru**** 2770855 points

Other Parts Discussed in Thread: LM317

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1609218/lm317-lm317-parallel-configuration-support

器件型号: LM317

你(们)好  

我正在尝试在电流共享模式下使用两个 LM317、但这种在电源路径上使用两个 LM317 的模式是否会对电流抖动产生任何问题? 我们是否需要挂钩电阻器?

 

image.png

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Agxin:

    我实际上认为这种情况下没有电阻器 R323 和 R319(见简化版)也可以使用。 每个 LM317 将独立调节其输出至调节电阻两端的电压、并且电流将 与电阻一样共享。

     在该配置中、调节连接后不需要镇流电阻器。 并联电压调节受益于镇流电阻器、因为当电流均等共享时、性能更佳。 在电流调节模式下、电流本身会在输出节点处独立调节并相加 (KCL)、并且不要求每个输出引脚处的电压(独立补偿每个电流)相同。

    此致、

    Gregory Thompson