This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] UCC27714:125度峰值输出电流

Guru**** 2509455 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1061996/ucc27714-125-degrees-peak-output-current

器件型号:UCC27714

大家好、

 125度时、剩余峰值输出电流(灌电流和拉电流)的额定电流是多少?  

 

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Kevin:

    内部驱动器上拉和下拉器件的 Rdson 通常从25度温度增加到125度温度、增加~2:1。 峰值输出电流也与温度相关、通常在25摄氏度至125摄氏度范围内有2:1的影响、输出电流随着温度的升高而下降。

    确认这是否能解决您的问题、或者您可以在此主题上发布其他问题。

    此致、