This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1048824/tps62901-connect-pg-pin-to-gnd-or-float
你(们)好
您能否帮助检查 TPS62901 PG 引脚是否可以连接到 GND 或使其悬空？
谢谢你。
你(们)好、Shawn
如果未使用电源正常输出、建议连接到 GND 或使其保持开路。 任何一个都可以。
谢谢！
Tahar
