This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS63805:电源正常状态的生成方式是准确的?

Guru**** 657500 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1044091/tps63805-precisely-how-is-power-good-generated

器件型号:TPS63805

电源正常输出是否完全基于 VOUT 电平和目标 VOUT 电平之间的电压比较?  还是在逻辑中还使用其他信号?  例如、电源正常是否也由使能输入门控?

谢谢、

Scott

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Scott、

    没错、PG 状态直接由 Vout 电平决定。

    此致

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    谢谢!

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

     您好、Scott、

    不用客气,下次再见

    此致

    TAO