请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPS7A02 大家好、
LDO (TPS7A2050PDBVR )输出端的电压不能超过5伏 、其输入端的电压为5、8伏、这是什么问题呢? 输入和输出端使用的电容器为22uf MLCC。
我在其中一个器件中应用它时获得了5、2伏的输出、但在另一个器件中遵循相同的条件时、我只获得4、9伏。
您能不能就此 LDO 行为提出解决方案。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
大家好、
LDO (TPS7A2050PDBVR )输出端的电压不能超过5伏 、其输入端的电压为5、8伏、这是什么问题呢? 输入和输出端使用的电容器为22uf MLCC。
我在其中一个器件中应用它时获得了5、2伏的输出、但在另一个器件中遵循相同的条件时、我只获得4、9伏。
您能不能就此 LDO 行为提出解决方案。